Add to watchlist
Remove boat from favorites
14
Would you like to have your watchlist on all your devices? Log in or register for free.
300
Only 300 listings can be saved to the watchlist. To save additional listings, you must first remove some listings from the watchlist.
boatDetail
boatDetail
0
bid=s307789
bid=s307789
s307789
5
Formosa 51 (sailboat) for sale
sailboat / sloop, used boatPictures
1 / 41
▶
▶
pictures
share
Description +
Remarks :
This 1981 Formosa 51 staysail ketch is a well-proven and highly regarded bluewater cruising yacht, designed by William Garden and built by Formosa Boat Building Co. Ltd in Taiwan. A full-keel, long-waterline heavy-displacement design, the Formosa 51 earned a strong reputation for seakeeping and offshore capability during the 1970s and 1980s, and this example has been comprehensively updated between 2023 and 2025 to bring her systems, rig, and accommodation to a high standard. She is offered for sale as a practical and well-found liveaboard bluewater ketch, ready for immediate use.
The programme of work carried out under current ownership is extensive and methodical: a fully overhauled engine with new exhaust, steering, and cooling systems; all-new sails on both masts including furling main, furling mizzen, furling staysail, and a new yankee; refurbished and extended main mast and a new mizzen mast; 900W of solar with an MPPT controller and six new gel batteries; all 14 seacocks replaced with Trudesign fittings; new water, fuel, black water, and grey water tankage; and a hydraulic bow thruster and windlass installation. The teak interior was professionally refinished in 2023.
Highlights Listed below but included in Full Specs:
Designed by William Garden; long-keel offshore ketch
Ketch rig with all-new sails — furling main, furling mizzen, furling staysail, and hank-on yankee (2023–2025)
Refurbished and extended timber-boxed main mast; new timber-boxed pine mizzen mast (2023)
Perkins 6.354, 125hp diesel — valves and injectors overhauled; new exhaust, cooler, and steering cables (2024–2025)
900W solar array with MPPT controller (2023)
6 x 160Ah gel battery bank (2023)
Hydraulic bow thruster — new piping and header tank (2023)
Hydraulic windlass — new engine-mounted pump and hoses (2023)
All 14 seacocks and through-hull fittings replaced with Trudesign (2024)
1,200-litre water capacity — tanks fitted (2023)
650-litre fuel capacity — new 300-litre stainless steel tank (2023)
Two electric heads (2023)
B&G touchscreen chartplotter at helm (2023); Raymarine VHF with AIS (2025)
Hydraulic autopilot control unit at helm (2024)
Full solid teak interior professionally refinished in satin varnish (2023)
33kg Rocna anchor with 100m x 12mm chain (2023)
Fixed bimini and matching boom tent with foredeck extension (2023)
New black Dyneema guardrails with safety nets all round (2024)
Five-cabin layout with upper saloon and wheelhouse
BROKER'S REMARKS
The Formosa 51 is one of the better-known names in classic bluewater cruising — a William Garden design that built a strong following through the 1970s and 1980s for its solid construction, seakindly motion, and practical liveaboard accommodation. This 1981 example has been in the hands of an owner who understands what a vessel of this type requires and has invested consistently to bring her up to a high standard. The work carried out since 2023 is substantial and well-targeted: structural seacocks, rig and sails, engine, tankage, and electrical systems have all been addressed. For a buyer looking for a capable offshore ketch with the major work already done, this is a vessel that repays careful inspection.
Below decks, the accommodation is generous. Five berths across four cabins, an upper saloon and wheelhouse with chart table, and a well-fitted galley with standing refrigerator and dining table make for a comfortable and practical liveaboard environment. The solid teak interior, professionally refinished in satin varnish in 2023 with headliners in oyster white, is in good order and gives the boat a warm character below that is difficult to replicate in a modern production vessel.
With 900W of solar, a large gel battery bank, new tankage, hydraulic bow thruster, and a complete sail wardrobe across both masts, this Formosa 51 is well set up for extended Mediterranean passages and offshore use. Early inspection is recommended.
Accommodation :
ACCOMMODATION
The Formosa 51 offers generous liveaboard accommodation across four cabins and a large upper saloon/wheelhouse. The interior is finished throughout in solid teak, professionally refinished in satin varnish in 2023, with headliners painted in oyster white. Bronze portholes and hatches have been polished. New cushion and mattress covers were fitted throughout in 2023. Headroom is approximately 2m in the saloon — generous for a vessel of this era and type.
LAYOUT
The layout comprises a forward cabin with bunk berths and a sink, a second cabin with a pull-out double berth, a lower saloon with a dining table that drops to form a large double berth, and a master cabin aft with a large double berth. A very large upper saloon and wheelhouse features a chart table, a second dining table with seating that drops to form a large double, and the inside helm position. Two heads compartments are fitted.
DOMESTIC
The galley is equipped with a 12V compressor refrigerator/freezer and a new stainless steel sink (2023), with a large dining table opposite. Two heads compartments are fitted, each with a new electric toilet (2023). The forward heads includes a small bath in the shower compartment.
Inventory :
NAVIGATION
Chartplotter: B&G touchscreen at helm (2023)
Autopilot: Raymarine control unit at helm (2024), operating original hydraulic pump and steering
VHF radio: Raymarine with AIS capability (2025)
Chart table: Large chart table in upper saloon/wheelhouse
DECK
Windlass: Hydraulic, engine-mounted pump — new pump and hoses (2023)
Main anchor: 33kg Rocna with 100m x 12mm chain (2023)
Second anchor: 50kg CQR — spare
Kedge anchor: 25kg — mounted on second bow roller
Mooring lines: Set of long lines (60m each); full set of mooring warps
Fenders: 6 new long fenders (2025); 2 large ball fenders; 2 smaller fenders
Guardrails: New black Dyneema with full safety nets all round (2024)
Passerelle: Large lifting passerelle — hoisted to mizzen mast
Deck wash: Salt water deck wash (2025)
SAFETY
Seacocks: All 14 seacocks and through-hull fittings replaced with Trudesign composite fittings (2024)
Life raft: 6px
CANVAS
Fixed bimini: Custom-built, fitted (2023) — 900W solar array mounted atop
Boom tent: Large, with zip-on foredeck extension, matching canvas (2023)
TENDER
Optional extra
MISCELLANEOUS
Two Seldén self-tailing winches — supplied, not yet fitted
Original davits — removed but included
Set of long mooring lines (60m each)
LED engine room lighting (2023)
HISTORY
This Formosa 51 ketch was built by Formosa Boat Building Co. Ltd in Taiwan in 1981 — one of the later examples of a model produced between 1972 and 1984 from the drawing office of William Garden. The Formosa 51 was designed as a serious offshore cruising vessel, with a full long keel, solid GRP construction, and a heavy-displacement hull that has since carried numerous owners on ocean passages.
Under current ownership the yacht has undergone an extensive programme of work between 2023 and 2025. Major works include a full engine overhaul with valve and injector rebuild and new Perkins head gaskets (2025), a new custom stainless steel exhaust system (2025), replacement of the engine cooler (2024), new steering and gear cables (2025), a new larger alternator (2023), and overhaul of both Capilano hydraulic steering pumps with seal replacement (2024). All 14 seacocks and through-hull fittings were replaced with Trudesign composite fittings in 2024. The hydraulic bow thruster and windlass received new piping, a new engine-mounted pump, and new hoses in 2023.
The rig was comprehensively updated in 2023: the main mast was refurbished and extended, a new timber-boxed pine mizzen mast was fitted, and a complete new sail wardrobe was installed across both masts including a furling main, furling mizzen, furling staysail, and new hank-on yankee. New stainless steel mast base rigging plates were fitted in 2025. New black Dyneema guardrails with full safety nets were installed in 2024. The electrical system was updated with a 900W solar array with MPPT controller and six new 160Ah gel batteries in 2023. New water, fuel, black water, and grey water tankage was installed in 2023. The solid teak interior was professionally refinished in satin varnish with oyster white headliners in 2023, and new cushion and mattress covers fitted throughout. Further details of ownership and maintenance history are available on request.
Mechanical :
CONSTRUCTION
Builder: Formosa Boat Building Co. Ltd, Taiwan
Designer: William Garden
Year: 1981
Hull material: GRP (solid fibreglass below waterline)
Hull type: Full long keel
Rig: Staysail ketch
Construction: Solid GRP hull; 1¼-inch fibreglass below waterline
DIMENSIONS
LOA: 15.49m (50ft 10in) — per manufacturer specification (see note below)
LWL: 12.06m (39ft 7in) — per manufacturer specification
Beam: 4.29m (14ft 2in) — per manufacturer specification
Draft (max): 1.88m (6ft 2in) — per manufacturer specification
Displacement: 23,587kg (52,000 lbs) — per manufacturer specification
Ballast: 5,443kg (12,000 lbs), cast iron — per manufacturer specification
Sail area: 116.5m² (1,254ft²) — per manufacturer specification
MECHANICAL
Engine: Perkins 6.354, 125hp diesel inboard
Engine works: Valves and injectors overhauled; head gasket and associated gaskets replaced using genuine Perkins parts (2025)
Exhaust: New custom stainless steel self-cooling exhaust system (2025)
Engine cooler: Replaced with new gaskets (2024)
Alternator: New larger alternator fitted (2023)
Steering cables: New steering and gear cables (2025)
Hydraulic steering: Two Capilano hydraulic steering pumps — seals replaced, systems refilled (2024); operating helm above deck and in wheelhouse
Bow thruster: Hydraulic — new piping and hydraulic fluid header tank (2023)
Windlass: Hydraulic, engine-mounted pump — new pump and new hoses (2023)
Drive type: Shaft drive
Engine hours:5000
PERFORMANCE
Cruising speed (motor): Approximately 6–7 knots
Hull speed: Approximately 8.4 knots
Sail area / displacement ratio: 14.47
Comfort ratio: 55.3 (per manufacturer data — notably high for offshore use)
TANKAGE
Fuel: 650 litres (143 gallons) — steel tank 350 litres; new stainless steel tank 300 litres (2023)
Water: 1,200 litres (264 gallons) — tanks fitted (2023)
Black water tank: Fitted (2023)
Grey water tank: Fitted (2023)
Salt water deck wash: Fitted (2025)
ELECTRICAL
Battery bank: 6 x 160Ah gel (2023)
Solar: 900W array mounted on fixed bimini frame (2023)
Solar controller: MPPT charge controller
Shore power: To be confirmed
LED engine room lighting (2023)
LED strip lighting throughout (2025)
230V fans (2025)
12V USB charging points — above and below deck (2023/2025)
RIGGING
Rig type: Staysail ketch
Main mast: Timber-boxed aluminium — refurbished and extended (2023)
Mizzen mast: New timber-boxed pine (2023)
Mast base rigging plates: New stainless steel (2025)
Mainsheet and kicker brackets: Additional stainless steel brackets (2024)
Kicker: Dyneema kicker with Seldén 4:1 pulley system
Running rigging: Black Dyneema throughout
Guardrails: New black Dyneema with full safety nets all round (2024)
Winches: Two large Barlow headsail winches; one large Barlow mainsheet winch; two Seldén self-tailing winches (supplied, not yet fitted)
SAILS
Mainsail: Good condition (2023)
Mizzen: furling mizzen (2023)
Staysail: furling staysail (2025) Furler needs repair/replacement
Yankee: hank-on yankee (2023)
Heavy weather staysail: Spare — supplied... whole text
This 1981 Formosa 51 staysail ketch is a well-proven and highly regarded bluewater cruising yacht, designed by William Garden and built by Formosa Boat Building Co. Ltd in Taiwan. A full-keel, long-waterline heavy-displacement design, the Formosa 51 earned a strong reputation for seakeeping and offshore capability during the 1970s and 1980s, and this example has been comprehensively updated between 2023 and 2025 to bring her systems, rig, and accommodation to a high standard. She is offered for sale as a practical and well-found liveaboard bluewater ketch, ready for immediate use.
The programme of work carried out under current ownership is extensive and methodical: a fully overhauled engine with new exhaust, steering, and cooling systems; all-new sails on both masts including furling main, furling mizzen, furling staysail, and a new yankee; refurbished and extended main mast and a new mizzen mast; 900W of solar with an MPPT controller and six new gel batteries; all 14 seacocks replaced with Trudesign fittings; new water, fuel, black water, and grey water tankage; and a hydraulic bow thruster and windlass installation. The teak interior was professionally refinished in 2023.
Highlights Listed below but included in Full Specs:
Designed by William Garden; long-keel offshore ketch
Ketch rig with all-new sails — furling main, furling mizzen, furling staysail, and hank-on yankee (2023–2025)
Refurbished and extended timber-boxed main mast; new timber-boxed pine mizzen mast (2023)
Perkins 6.354, 125hp diesel — valves and injectors overhauled; new exhaust, cooler, and steering cables (2024–2025)
900W solar array with MPPT controller (2023)
6 x 160Ah gel battery bank (2023)
Hydraulic bow thruster — new piping and header tank (2023)
Hydraulic windlass — new engine-mounted pump and hoses (2023)
All 14 seacocks and through-hull fittings replaced with Trudesign (2024)
1,200-litre water capacity — tanks fitted (2023)
650-litre fuel capacity — new 300-litre stainless steel tank (2023)
Two electric heads (2023)
B&G touchscreen chartplotter at helm (2023); Raymarine VHF with AIS (2025)
Hydraulic autopilot control unit at helm (2024)
Full solid teak interior professionally refinished in satin varnish (2023)
33kg Rocna anchor with 100m x 12mm chain (2023)
Fixed bimini and matching boom tent with foredeck extension (2023)
New black Dyneema guardrails with safety nets all round (2024)
Five-cabin layout with upper saloon and wheelhouse
BROKER'S REMARKS
The Formosa 51 is one of the better-known names in classic bluewater cruising — a William Garden design that built a strong following through the 1970s and 1980s for its solid construction, seakindly motion, and practical liveaboard accommodation. This 1981 example has been in the hands of an owner who understands what a vessel of this type requires and has invested consistently to bring her up to a high standard. The work carried out since 2023 is substantial and well-targeted: structural seacocks, rig and sails, engine, tankage, and electrical systems have all been addressed. For a buyer looking for a capable offshore ketch with the major work already done, this is a vessel that repays careful inspection.
Below decks, the accommodation is generous. Five berths across four cabins, an upper saloon and wheelhouse with chart table, and a well-fitted galley with standing refrigerator and dining table make for a comfortable and practical liveaboard environment. The solid teak interior, professionally refinished in satin varnish in 2023 with headliners in oyster white, is in good order and gives the boat a warm character below that is difficult to replicate in a modern production vessel.
With 900W of solar, a large gel battery bank, new tankage, hydraulic bow thruster, and a complete sail wardrobe across both masts, this Formosa 51 is well set up for extended Mediterranean passages and offshore use. Early inspection is recommended.
Accommodation :
ACCOMMODATION
The Formosa 51 offers generous liveaboard accommodation across four cabins and a large upper saloon/wheelhouse. The interior is finished throughout in solid teak, professionally refinished in satin varnish in 2023, with headliners painted in oyster white. Bronze portholes and hatches have been polished. New cushion and mattress covers were fitted throughout in 2023. Headroom is approximately 2m in the saloon — generous for a vessel of this era and type.
LAYOUT
The layout comprises a forward cabin with bunk berths and a sink, a second cabin with a pull-out double berth, a lower saloon with a dining table that drops to form a large double berth, and a master cabin aft with a large double berth. A very large upper saloon and wheelhouse features a chart table, a second dining table with seating that drops to form a large double, and the inside helm position. Two heads compartments are fitted.
DOMESTIC
The galley is equipped with a 12V compressor refrigerator/freezer and a new stainless steel sink (2023), with a large dining table opposite. Two heads compartments are fitted, each with a new electric toilet (2023). The forward heads includes a small bath in the shower compartment.
Inventory :
NAVIGATION
Chartplotter: B&G touchscreen at helm (2023)
Autopilot: Raymarine control unit at helm (2024), operating original hydraulic pump and steering
VHF radio: Raymarine with AIS capability (2025)
Chart table: Large chart table in upper saloon/wheelhouse
DECK
Windlass: Hydraulic, engine-mounted pump — new pump and hoses (2023)
Main anchor: 33kg Rocna with 100m x 12mm chain (2023)
Second anchor: 50kg CQR — spare
Kedge anchor: 25kg — mounted on second bow roller
Mooring lines: Set of long lines (60m each); full set of mooring warps
Fenders: 6 new long fenders (2025); 2 large ball fenders; 2 smaller fenders
Guardrails: New black Dyneema with full safety nets all round (2024)
Passerelle: Large lifting passerelle — hoisted to mizzen mast
Deck wash: Salt water deck wash (2025)
SAFETY
Seacocks: All 14 seacocks and through-hull fittings replaced with Trudesign composite fittings (2024)
Life raft: 6px
CANVAS
Fixed bimini: Custom-built, fitted (2023) — 900W solar array mounted atop
Boom tent: Large, with zip-on foredeck extension, matching canvas (2023)
TENDER
Optional extra
MISCELLANEOUS
Two Seldén self-tailing winches — supplied, not yet fitted
Original davits — removed but included
Set of long mooring lines (60m each)
LED engine room lighting (2023)
HISTORY
This Formosa 51 ketch was built by Formosa Boat Building Co. Ltd in Taiwan in 1981 — one of the later examples of a model produced between 1972 and 1984 from the drawing office of William Garden. The Formosa 51 was designed as a serious offshore cruising vessel, with a full long keel, solid GRP construction, and a heavy-displacement hull that has since carried numerous owners on ocean passages.
Under current ownership the yacht has undergone an extensive programme of work between 2023 and 2025. Major works include a full engine overhaul with valve and injector rebuild and new Perkins head gaskets (2025), a new custom stainless steel exhaust system (2025), replacement of the engine cooler (2024), new steering and gear cables (2025), a new larger alternator (2023), and overhaul of both Capilano hydraulic steering pumps with seal replacement (2024). All 14 seacocks and through-hull fittings were replaced with Trudesign composite fittings in 2024. The hydraulic bow thruster and windlass received new piping, a new engine-mounted pump, and new hoses in 2023.
The rig was comprehensively updated in 2023: the main mast was refurbished and extended, a new timber-boxed pine mizzen mast was fitted, and a complete new sail wardrobe was installed across both masts including a furling main, furling mizzen, furling staysail, and new hank-on yankee. New stainless steel mast base rigging plates were fitted in 2025. New black Dyneema guardrails with full safety nets were installed in 2024. The electrical system was updated with a 900W solar array with MPPT controller and six new 160Ah gel batteries in 2023. New water, fuel, black water, and grey water tankage was installed in 2023. The solid teak interior was professionally refinished in satin varnish with oyster white headliners in 2023, and new cushion and mattress covers fitted throughout. Further details of ownership and maintenance history are available on request.
Mechanical :
CONSTRUCTION
Builder: Formosa Boat Building Co. Ltd, Taiwan
Designer: William Garden
Year: 1981
Hull material: GRP (solid fibreglass below waterline)
Hull type: Full long keel
Rig: Staysail ketch
Construction: Solid GRP hull; 1¼-inch fibreglass below waterline
DIMENSIONS
LOA: 15.49m (50ft 10in) — per manufacturer specification (see note below)
LWL: 12.06m (39ft 7in) — per manufacturer specification
Beam: 4.29m (14ft 2in) — per manufacturer specification
Draft (max): 1.88m (6ft 2in) — per manufacturer specification
Displacement: 23,587kg (52,000 lbs) — per manufacturer specification
Ballast: 5,443kg (12,000 lbs), cast iron — per manufacturer specification
Sail area: 116.5m² (1,254ft²) — per manufacturer specification
MECHANICAL
Engine: Perkins 6.354, 125hp diesel inboard
Engine works: Valves and injectors overhauled; head gasket and associated gaskets replaced using genuine Perkins parts (2025)
Exhaust: New custom stainless steel self-cooling exhaust system (2025)
Engine cooler: Replaced with new gaskets (2024)
Alternator: New larger alternator fitted (2023)
Steering cables: New steering and gear cables (2025)
Hydraulic steering: Two Capilano hydraulic steering pumps — seals replaced, systems refilled (2024); operating helm above deck and in wheelhouse
Bow thruster: Hydraulic — new piping and hydraulic fluid header tank (2023)
Windlass: Hydraulic, engine-mounted pump — new pump and new hoses (2023)
Drive type: Shaft drive
Engine hours:5000
PERFORMANCE
Cruising speed (motor): Approximately 6–7 knots
Hull speed: Approximately 8.4 knots
Sail area / displacement ratio: 14.47
Comfort ratio: 55.3 (per manufacturer data — notably high for offshore use)
TANKAGE
Fuel: 650 litres (143 gallons) — steel tank 350 litres; new stainless steel tank 300 litres (2023)
Water: 1,200 litres (264 gallons) — tanks fitted (2023)
Black water tank: Fitted (2023)
Grey water tank: Fitted (2023)
Salt water deck wash: Fitted (2025)
ELECTRICAL
Battery bank: 6 x 160Ah gel (2023)
Solar: 900W array mounted on fixed bimini frame (2023)
Solar controller: MPPT charge controller
Shore power: To be confirmed
LED engine room lighting (2023)
LED strip lighting throughout (2025)
230V fans (2025)
12V USB charging points — above and below deck (2023/2025)
RIGGING
Rig type: Staysail ketch
Main mast: Timber-boxed aluminium — refurbished and extended (2023)
Mizzen mast: New timber-boxed pine (2023)
Mast base rigging plates: New stainless steel (2025)
Mainsheet and kicker brackets: Additional stainless steel brackets (2024)
Kicker: Dyneema kicker with Seldén 4:1 pulley system
Running rigging: Black Dyneema throughout
Guardrails: New black Dyneema with full safety nets all round (2024)
Winches: Two large Barlow headsail winches; one large Barlow mainsheet winch; two Seldén self-tailing winches (supplied, not yet fitted)
SAILS
Mainsail: Good condition (2023)
Mizzen: furling mizzen (2023)
Staysail: furling staysail (2025) Furler needs repair/replacement
Yankee: hank-on yankee (2023)
Heavy weather staysail: Spare — supplied... whole text
close selection
Boat data +
Boat data Formosa 51
Price:
€ 94,500
VAT incl.
Boat ID:
s307789
Boat model:
Formosa 51
Manufacturer:
Boat type:
sailboat
Boat category:
sloop
Category:
used boat
Year built:
1981
Location:
Greece, Lefkada
Hull material:
GRP/polyester
Technical data
Length:
15.24 m (50 feet)
Beam:
4.27 m
Engine:
Perkins Sabre 6.354
Engine power:
125 hp (92 kW)
Fuel:
diesel
close selection
Formosa 51+
Formosa 51 at a glance
On offer is this Formosa 51 from 1981, a boat in the category sloop. Length overall is 15.24 m, beam 4.27 m. It is powered by a single Perkins Sabre 6.354 engine with 125 hp. It runs on diesel. The hull is made of GRP/polyester. Equipment highlights: autopilot, davits, sink, bimini top, life raft, plotter. Its berth is currently in Greece (Lefkada). It is offered by Band of Boats for € 94,500 (VAT incl.).
close selection
Advertising / service
Equipment+
Buy Formosa 51 - equipment sloop - sailboat for sale
Navigationautopilot, plotter, VHF radio
Technical equipment
davits, shore supply 220V, bow thruster
Safety
life raft
Deck equipment
bimini top, fenders
Interior equipment
sink
close selection
Contact-
Formosa 51 - info without obligation - sloop
pf-21790
Please tell the boat owner you found this offer on Yachtall.
Contact:
Band of Boats
Network Yacht Brokers Lefkas
Cleopatra Marina (Dock side) Atkio-Preveza
48100 IONIAN ISLANDS
Greece
Phone:
show
Languages:
Greek, English, French
On yachtall.com for 7 yearsclose selection
Other boats (like Formosa 51) - for buy and for sale
Formosa 51
Sailboat / sloop: Formosa, used boat, GRP/polyesterLength x beam: 15.49 m x 4.40 m, 15.49 x 4.40 m built: 1979, cabins: 3
Engine: Volvo Penta Timray 41 L-A, 150 hp (110 kW), diesel
€ 79,000
Location: Portugal, Porto
1979
Company: Band of Boats
Price: € 85,000 € 79,000, VAT incl.
Formosa 47
Sailboat / sloop: Formosa, used boatLength x beam: 14.17 m x 4.27 m, 14.17 x 4.27 m built: 1980, cabins: 3
Engine: 110 hp (81 kW), diesel
€ 95,000
Location: France, Rochefort
1980
Company: Band of Boats
Price: € 95,000, VAT incl.
Bénéteau Oceanis 46.1
Sailboat / sloop: Bénéteau, used boatLength x beam: 14.60 m x 4.50 m, 14.60 x 4.50 m built: 2019, cabins: 3
Engine: 57 hp (42 kW), diesel
€ 329,500
Location: Netherlands, 4311 Nc, Bruinisse
2019
Company: Band of Boats
Price: € 329,500, VAT incl.
Grand Soleil 46 LC
Sailboat / sloop: Grand Soleil, used boat, GRP/polyesterLength x beam: 14.72 m x 4.41 m, 14.72 x 4.41 m built: 2016, cabins: 3
Engine: Volvo Penta D2-75F, 75 hp (55 kW), diesel
€ 440,000
Location: Italy, Lido di Ostia
2016
Company: Band of Boats
Price: € 440,000, VAT incl.
These sailboats could also be of interest to you
Formosa 50 (14.86 m) Formosa 47 (14.33 m) Formosa 46 (14 m) Formosa 47 Ketch (14.14 m) Bénéteau Oceanis 48 (14.54 m) Bali 4.6 (14.28 m) Bali 4.8 (14.86 m) Lagoon 51 (15.35 m) X-Yachts X4.9 (15 m) Nautitech 47 (14.50 m) Bavaria Cruiser 46 (14.27 m) Bavaria C45 (14.43 m)
Which version do you wish to see?
Send request
Formosa 51, built 1981
Contact:
Band of Boats
