Hatırlatma listesine ekle
Tekneyi hatırlatma listesinden kaldırın
boatDetail
boatDetail
0
bid=s240257
bid=s240257
s240257
5
AB Inflatables Ventus 9 VL (şişme bot) - Satış
şişme bot / sert gövdeli şişmebot (RIB), ikinci el tekneResimler
1 / 5
▶
resimler
yazdır
paylaş
Açıklama +
Brand new quality RIB from AB Inflatables
Ventus: Lightweight full-length fiberglass deep-V RIB
The AB Inflatables Ventus is a lightweight full-length fiberglass deep-V RIB designed for extra space, durability and performance.
Ventus is made as the perfect lightweight fiberglass tender with a focus on performance. Thanks to its unique design, Ventus requires very little horsepower without compromising on maneuverability.
Ventus packs a wide range of features into a small, lightweight package. With a deeper freeboard, Ventus is equipped with a spacious interior that ensures a comfortable, stable and dry ride. With an 820 CSM Orca® Coated Fabric on the model, it provides extra protection for greater resilience and durability. The integrated non-skid deck material also provides extra safety and security on the water.
Ventus is designed with an additional air chamber built into the hull to increase safety. For easy handling on deck or davits, it can also be pulled up on a sandy beach for shore excursions with ease.
KEY FEATURES
Lightweight fiberglass tender
More payload capacity
Solid rubber track
"V" Hull
Removable aluminum rose seat
ORCA (CSM) coated fabric
Inner aluminum plate with safety lip
Reinforced (CSM) fabric handles
SPECIFICATIONS
Overall length 9'6" / 2.90m
Overall width 5'7" / 1.72m
Interior length 6'9" / 2.06m
Internal width 2' 8" / 0.81m
Pipe diameter 17" / 0.43m
Number of chambers 3+1
Person capacity 4
Weight 106 lbs / 48 kg
Recommended HP 9.9hp / 7.4kw
Maximum HP 15hp / 11.2kw
Shaft length 38.1 cm
RDC Design Category C
STANDARD EQUIPMENT
Hand-laid fiberglass deep "V" hull
Stringer System laminated into the hull
Non-slip rubber floor panels
Plastic exterior stern plate
Aluminum inner stern plate with safety lip
Stainless steel bow eye
3 stainless steel Davit lifting points
Internal hull drain with plug
Deck condensation plug
Orca (CSM) five-layer coated fabric
Elevated single rub rail
Skub Push Plastic Non-corrosive 2-stage inflation valves
Removable rose seat
Oarlock Base
Telescopic oars with aluminum shaft
Oar holders
Hand Pump
Maintenance kit
User manual
Extra air retention chamber under the floor
3-layer reinforced seams
Ventus comes with a number of standard features including a handcrafted fiberglass deep-V hull, non-slip rubber floor panels, stainless steel bow eye and davit lifting points, ORCA (CSM) five-layer coated fabric and much more.
Experience the lightweight power and durability of Ventus as you steer this full-length fiberglass RIB. Take the helm and explore the water in safety and comfort in Ventus' stylish and capable design.
Engine:
More power, more control, more comfort. Mercury 15 hp 4-stroke outboards are engineered to enhance every minute you spend on the water:
- Innovative steering lever that can be easily adjusted for left or right hand operation.
- Electronic Fuel Injection (EFI) ensures fast starting and quick throttle response.
- A new two-cylinder engine block ensures excellent torque and fast acceleration.
- Lightweight design - makes it easy to move for better performance.
- The new engine mount eliminates boat and steering handle vibrations.
- Maintenance is easy with the drip-free oil change.
- Ready for a wide range of applications. Choose electric start or with cord, tiller or remote control - and up to three shaft lengths.
Less weight, more torque
A new low-friction design with a single overhead camshaft provides more torque. At the same time, the overall weight has been reduced by 4.5 kg - a significant reduction that makes a big difference on small boats. More power and less weight make it easier to plane and increase top speed. These are the fastest and most powerful outboard motors in their class!
Specifications:
Mercury F 15 MH EFI
2 cylinders
Hp 15
Category four-stroke
Weight 45 kg
Rear-view mirror height 381 mm
Start Manual
Steering Steering handle
Fuel system Electronic Fuel injection
Trim settings 6 manual... tam metin
Ventus: Lightweight full-length fiberglass deep-V RIB
The AB Inflatables Ventus is a lightweight full-length fiberglass deep-V RIB designed for extra space, durability and performance.
Ventus is made as the perfect lightweight fiberglass tender with a focus on performance. Thanks to its unique design, Ventus requires very little horsepower without compromising on maneuverability.
Ventus packs a wide range of features into a small, lightweight package. With a deeper freeboard, Ventus is equipped with a spacious interior that ensures a comfortable, stable and dry ride. With an 820 CSM Orca® Coated Fabric on the model, it provides extra protection for greater resilience and durability. The integrated non-skid deck material also provides extra safety and security on the water.
Ventus is designed with an additional air chamber built into the hull to increase safety. For easy handling on deck or davits, it can also be pulled up on a sandy beach for shore excursions with ease.
KEY FEATURES
Lightweight fiberglass tender
More payload capacity
Solid rubber track
"V" Hull
Removable aluminum rose seat
ORCA (CSM) coated fabric
Inner aluminum plate with safety lip
Reinforced (CSM) fabric handles
SPECIFICATIONS
Overall length 9'6" / 2.90m
Overall width 5'7" / 1.72m
Interior length 6'9" / 2.06m
Internal width 2' 8" / 0.81m
Pipe diameter 17" / 0.43m
Number of chambers 3+1
Person capacity 4
Weight 106 lbs / 48 kg
Recommended HP 9.9hp / 7.4kw
Maximum HP 15hp / 11.2kw
Shaft length 38.1 cm
RDC Design Category C
STANDARD EQUIPMENT
Hand-laid fiberglass deep "V" hull
Stringer System laminated into the hull
Non-slip rubber floor panels
Plastic exterior stern plate
Aluminum inner stern plate with safety lip
Stainless steel bow eye
3 stainless steel Davit lifting points
Internal hull drain with plug
Deck condensation plug
Orca (CSM) five-layer coated fabric
Elevated single rub rail
Skub Push Plastic Non-corrosive 2-stage inflation valves
Removable rose seat
Oarlock Base
Telescopic oars with aluminum shaft
Oar holders
Hand Pump
Maintenance kit
User manual
Extra air retention chamber under the floor
3-layer reinforced seams
Ventus comes with a number of standard features including a handcrafted fiberglass deep-V hull, non-slip rubber floor panels, stainless steel bow eye and davit lifting points, ORCA (CSM) five-layer coated fabric and much more.
Experience the lightweight power and durability of Ventus as you steer this full-length fiberglass RIB. Take the helm and explore the water in safety and comfort in Ventus' stylish and capable design.
Engine:
More power, more control, more comfort. Mercury 15 hp 4-stroke outboards are engineered to enhance every minute you spend on the water:
- Innovative steering lever that can be easily adjusted for left or right hand operation.
- Electronic Fuel Injection (EFI) ensures fast starting and quick throttle response.
- A new two-cylinder engine block ensures excellent torque and fast acceleration.
- Lightweight design - makes it easy to move for better performance.
- The new engine mount eliminates boat and steering handle vibrations.
- Maintenance is easy with the drip-free oil change.
- Ready for a wide range of applications. Choose electric start or with cord, tiller or remote control - and up to three shaft lengths.
Less weight, more torque
A new low-friction design with a single overhead camshaft provides more torque. At the same time, the overall weight has been reduced by 4.5 kg - a significant reduction that makes a big difference on small boats. More power and less weight make it easier to plane and increase top speed. These are the fastest and most powerful outboard motors in their class!
Specifications:
Mercury F 15 MH EFI
2 cylinders
Hp 15
Category four-stroke
Weight 45 kg
Rear-view mirror height 381 mm
Start Manual
Steering Steering handle
Fuel system Electronic Fuel injection
Trim settings 6 manual... tam metin
seçimi kapatın
Tekne bilgileri +
Tekne bilgileri AB Inflatables Ventus 9 VL
Fiyat:
kr. 62.500
(≈ € 8.380)
KDV hariç
Tekne kimliği:
s240257
Tekne modeli:
AB Inflatables Ventus 9 VL
Üretici:
AB Inflatables
Tekne türü:
şişme bot
Tekne kategorisi:
sert gövdeli şişmebot (RIB)
Kategori:
ikinci el tekne
Üretim yılı:
2022
Konum:
Danimarka, Svendborg
Gövde malzemesi:
hipalon
Gövde no.:
RIB-9VLmiligrey
Teknik bilgiler
Uzunluk:
2,90 m (9,5 feet)
Genişlik / su kesimi:
1,72 / 0,20 m
Ağırlık:
yakl. 45 kg
Motor:
Mercury
Motor gücü:
15 BG (11 kW)
Yakıt:
benzin
seçimi kapatın
Reklam/servis
Donanım+
AB Inflatables Ventus 9 VL satın almak - Satılık sert gövdeli şişmebot (RIB) - şişme bot donanımı
Güvenlikmanuel sintine pompası
seçimi kapatın
İletişim-
AB Inflatables Ventus 9 VL - Bağlayıcı olmadan bilgilendirme - sert gövdeli şişmebot (RIB)
pf-21790
Satıcıya, bu teklifi Happycharter’da bulduğunuzu söyleyin.
İletişim:
Band of Boats
Yachtbroker - International
3A Frederiksø
5700 Svendborg
Danimarka
Mobil:
göster
Diller:
danimarkaca, ingilizce, fransızca
4 yıldan beri yachtall.com’da
seçimi kapatın
Tekne al:
sert gövdeli şişmebotlar (RIB) şişme botlar satın almak şişme botlar Danimarka ikinci el tekneler
sert gövdeli şişmebotlar (RIB) şişme botlar satın almak şişme botlar Danimarka ikinci el tekneler
Başka tekneler (tıpkı AB Inflatables Ventus 9 VL) - satın almak ve satmak için
AB Inflatables Ventus 8 VL
Şişme bot / sert gövdeli şişmebot (RIB): AB Inflatables, ikinci el tekne, hipalonUzunluk x genişlik: 2,60 m x 1,67 m, 2,60 x 1,67 m ür. y.: 2023
Motor: Mercury F 9,9, 9 BG (6,6 kW), benzin
kr. 51.000
Demirleme yeri: Danimarka, Svendborg
2023
Şirket: Band of Boats
Fiyat: kr. 51.000 (≈ € 6.839), KDV hariç
AB Inflatables Lammina 9.5 AL
Şişme bot / sert gövdeli şişmebot (RIB): AB Inflatables, ikinci el tekne, hipalonUzunluk x genişlik: 2,90 m x 1,68 m, 2,90 x 1,68 m ür. y.: 2023
Motor: Mercury, 15 BG (11 kW), benzin
kr. 80.000
Demirleme yeri: Danimarka, Svendborg
2023
Şirket: Band of Boats
Fiyat: kr. 80.000 (≈ € 10.727), KDV hariç
AB Inflatables Lammina 10 AL
Şişme bot / sert gövdeli şişmebot (RIB): AB Inflatables, ikinci el tekne, hipalonUzunluk x genişlik: 3,19 m x 1,68 m, 3,19 x 1,68 m ür. y.: 2024
Motor: Mercury F 15 MH EFI, 15 BG (11 kW), benzin
kr. 51.000
Demirleme yeri: Danimarka, Svendborg
2024
Şirket: Band of Boats
Fiyat: kr. 51.000 (≈ € 6.839), KDV hariç
AB Inflatables Lammina 9.5 AL
Şişme bot / sert gövdeli şişmebot (RIB): AB Inflatables, ikinci el tekne, hipalonUzunluk x genişlik: 2,90 m x 1,68 m, 2,90 x 1,68 m ür. y.: 2024
Motor: Mercury F 15 MH EFI, 15 BG (11 kW), benzin
kr. 50.000
Demirleme yeri: Danimarka, Svendborg
2024
Şirket: Band of Boats
Fiyat: kr. 50.000 (≈ € 6.704), KDV hariç
Bu şişme botlar hoşunuza gidebilir
AB Inflatables Lammina 9 UL (2,76 m) AB Inflatables Ventus 8 VL (2,60 m) AB Inflatables Navigo 10 VS (3,19 m) AB Inflatables Ventus 8 VL (2,60 m) AB Inflatables Navigo 9 VS (2,90 m) AB Inflatables Lammina 10 UL (3,05 m) AB Inflatables Navigo 10 VS (3,19 m) AB Inflatables Mares 12 VSX (3,66 m) Highfield Ultra Light 290 (2,90 m) Yam 310 (3,10 m) Sur Marine ST 280 Classic (2,81 m) Quicksilver 270 Aluminium RIB PVC Ultra Light (2,70 m)Hangi sürümü görmek istiyorsunuz?
Talep gönderin
AB Inflatables Ventus 9 VL, yıl 2022
İletişim:
Band of Boats