Ajouter à la liste de souhaits
Supprimer le bateau de la liste des favoris
boatDetail
boatDetail
0
bid=s240257
bid=s240257
s240257
5
AB Inflatables Ventus 9 VL (bateau pneumatique) à vendre
bateau pneumatique / pneumatique, bateau d'occasionImages
1 / 5
▶
images
impression
partager
Description +
Brand new quality RIB from AB Inflatables
Ventus: Lightweight full-length fiberglass deep-V RIB
The AB Inflatables Ventus is a lightweight full-length fiberglass deep-V RIB designed for extra space, durability and performance.
Ventus is made as the perfect lightweight fiberglass tender with a focus on performance. Thanks to its unique design, Ventus requires very little horsepower without compromising on maneuverability.
Ventus packs a wide range of features into a small, lightweight package. With a deeper freeboard, Ventus is equipped with a spacious interior that ensures a comfortable, stable and dry ride. With an 820 CSM Orca® Coated Fabric on the model, it provides extra protection for greater resilience and durability. The integrated non-skid deck material also provides extra safety and security on the water.
Ventus is designed with an additional air chamber built into the hull to increase safety. For easy handling on deck or davits, it can also be pulled up on a sandy beach for shore excursions with ease.
KEY FEATURES
Lightweight fiberglass tender
More payload capacity
Solid rubber track
"V" Hull
Removable aluminum rose seat
ORCA (CSM) coated fabric
Inner aluminum plate with safety lip
Reinforced (CSM) fabric handles
SPECIFICATIONS
Overall length 9'6" / 2.90m
Overall width 5'7" / 1.72m
Interior length 6'9" / 2.06m
Internal width 2' 8" / 0.81m
Pipe diameter 17" / 0.43m
Number of chambers 3+1
Person capacity 4
Weight 106 lbs / 48 kg
Recommended HP 9.9hp / 7.4kw
Maximum HP 15hp / 11.2kw
Shaft length 38.1 cm
RDC Design Category C
STANDARD EQUIPMENT
Hand-laid fiberglass deep "V" hull
Stringer System laminated into the hull
Non-slip rubber floor panels
Plastic exterior stern plate
Aluminum inner stern plate with safety lip
Stainless steel bow eye
3 stainless steel Davit lifting points
Internal hull drain with plug
Deck condensation plug
Orca (CSM) five-layer coated fabric
Elevated single rub rail
Skub Push Plastic Non-corrosive 2-stage inflation valves
Removable rose seat
Oarlock Base
Telescopic oars with aluminum shaft
Oar holders
Hand Pump
Maintenance kit
User manual
Extra air retention chamber under the floor
3-layer reinforced seams
Ventus comes with a number of standard features including a handcrafted fiberglass deep-V hull, non-slip rubber floor panels, stainless steel bow eye and davit lifting points, ORCA (CSM) five-layer coated fabric and much more.
Experience the lightweight power and durability of Ventus as you steer this full-length fiberglass RIB. Take the helm and explore the water in safety and comfort in Ventus' stylish and capable design.
Engine:
More power, more control, more comfort. Mercury 15 hp 4-stroke outboards are engineered to enhance every minute you spend on the water:
- Innovative steering lever that can be easily adjusted for left or right hand operation.
- Electronic Fuel Injection (EFI) ensures fast starting and quick throttle response.
- A new two-cylinder engine block ensures excellent torque and fast acceleration.
- Lightweight design - makes it easy to move for better performance.
- The new engine mount eliminates boat and steering handle vibrations.
- Maintenance is easy with the drip-free oil change.
- Ready for a wide range of applications. Choose electric start or with cord, tiller or remote control - and up to three shaft lengths.
Less weight, more torque
A new low-friction design with a single overhead camshaft provides more torque. At the same time, the overall weight has been reduced by 4.5 kg - a significant reduction that makes a big difference on small boats. More power and less weight make it easier to plane and increase top speed. These are the fastest and most powerful outboard motors in their class!
Specifications:
Mercury F 15 MH EFI
2 cylinders
Hp 15
Category four-stroke
Weight 45 kg
Rear-view mirror height 381 mm
Start Manual
Steering Steering handle
Fuel system Electronic Fuel injection
Trim settings 6 manual... texte entier
Ventus: Lightweight full-length fiberglass deep-V RIB
The AB Inflatables Ventus is a lightweight full-length fiberglass deep-V RIB designed for extra space, durability and performance.
Ventus is made as the perfect lightweight fiberglass tender with a focus on performance. Thanks to its unique design, Ventus requires very little horsepower without compromising on maneuverability.
Ventus packs a wide range of features into a small, lightweight package. With a deeper freeboard, Ventus is equipped with a spacious interior that ensures a comfortable, stable and dry ride. With an 820 CSM Orca® Coated Fabric on the model, it provides extra protection for greater resilience and durability. The integrated non-skid deck material also provides extra safety and security on the water.
Ventus is designed with an additional air chamber built into the hull to increase safety. For easy handling on deck or davits, it can also be pulled up on a sandy beach for shore excursions with ease.
KEY FEATURES
Lightweight fiberglass tender
More payload capacity
Solid rubber track
"V" Hull
Removable aluminum rose seat
ORCA (CSM) coated fabric
Inner aluminum plate with safety lip
Reinforced (CSM) fabric handles
SPECIFICATIONS
Overall length 9'6" / 2.90m
Overall width 5'7" / 1.72m
Interior length 6'9" / 2.06m
Internal width 2' 8" / 0.81m
Pipe diameter 17" / 0.43m
Number of chambers 3+1
Person capacity 4
Weight 106 lbs / 48 kg
Recommended HP 9.9hp / 7.4kw
Maximum HP 15hp / 11.2kw
Shaft length 38.1 cm
RDC Design Category C
STANDARD EQUIPMENT
Hand-laid fiberglass deep "V" hull
Stringer System laminated into the hull
Non-slip rubber floor panels
Plastic exterior stern plate
Aluminum inner stern plate with safety lip
Stainless steel bow eye
3 stainless steel Davit lifting points
Internal hull drain with plug
Deck condensation plug
Orca (CSM) five-layer coated fabric
Elevated single rub rail
Skub Push Plastic Non-corrosive 2-stage inflation valves
Removable rose seat
Oarlock Base
Telescopic oars with aluminum shaft
Oar holders
Hand Pump
Maintenance kit
User manual
Extra air retention chamber under the floor
3-layer reinforced seams
Ventus comes with a number of standard features including a handcrafted fiberglass deep-V hull, non-slip rubber floor panels, stainless steel bow eye and davit lifting points, ORCA (CSM) five-layer coated fabric and much more.
Experience the lightweight power and durability of Ventus as you steer this full-length fiberglass RIB. Take the helm and explore the water in safety and comfort in Ventus' stylish and capable design.
Engine:
More power, more control, more comfort. Mercury 15 hp 4-stroke outboards are engineered to enhance every minute you spend on the water:
- Innovative steering lever that can be easily adjusted for left or right hand operation.
- Electronic Fuel Injection (EFI) ensures fast starting and quick throttle response.
- A new two-cylinder engine block ensures excellent torque and fast acceleration.
- Lightweight design - makes it easy to move for better performance.
- The new engine mount eliminates boat and steering handle vibrations.
- Maintenance is easy with the drip-free oil change.
- Ready for a wide range of applications. Choose electric start or with cord, tiller or remote control - and up to three shaft lengths.
Less weight, more torque
A new low-friction design with a single overhead camshaft provides more torque. At the same time, the overall weight has been reduced by 4.5 kg - a significant reduction that makes a big difference on small boats. More power and less weight make it easier to plane and increase top speed. These are the fastest and most powerful outboard motors in their class!
Specifications:
Mercury F 15 MH EFI
2 cylinders
Hp 15
Category four-stroke
Weight 45 kg
Rear-view mirror height 381 mm
Start Manual
Steering Steering handle
Fuel system Electronic Fuel injection
Trim settings 6 manual... texte entier
fermer la sélection
Données du bateau +
Données du bateau AB Inflatables Ventus 9 VL
Prix:
kr. 62 500
(≈ € 8 380)
HT
Réf du bateau:
s240257
Modèle du bateau:
AB Inflatables Ventus 9 VL
Constructeur:
AB Inflatables
Type de bateau:
bateau pneumatique
Catégorie de bateau:
pneumatique
Catégorie:
bateau d'occasion
Année de construction:
2022
Lieu:
Danemark, Svendborg
Matériau de la coque:
hypalon
N° de la coque:
RIB-9VLmiligrey
Données techniques
Longueur:
2,90 m (9,5 pieds)
Largeur / tirant d’eau:
1,72 / 0,20 m
Poids:
environ 45 kg
Moteur:
Mercury
Puissance du moteur:
15 cv (11 kW)
Carburant:
moteur à essence
fermer la sélection
Publicité / service
Équipement+
Acheter AB Inflatables Ventus 9 VL - équipements pneumatique - à vendre
Sécuritépompe de cale - manuelle
fermer la sélection
Contact-
AB Inflatables Ventus 9 VL - information sans obligation - pneumatique
pf-21790
N'oubliez pas d’indiquer au propriétaire du bateau que vous avez trouvé cette offre sur Yachtall.
Contact:
Band of Boats
Yachtbroker - International
3A Frederiksø
5700 Svendborg
Danemark
Portable:
afficher
Langues:
danois, anglais, français
Client sur yachtall.com depuis 4 ans
fermer la sélection
Acheter un bateau:
pneumatiques bateaux pneumatiques à vendre bateaux pneumatiques Danemark bateaux d’occasion
pneumatiques bateaux pneumatiques à vendre bateaux pneumatiques Danemark bateaux d’occasion
Autres bateaux (comme AB Inflatables Ventus 9 VL) - pour acheter et à vendre
AB Inflatables Navigo 9 VS
Bateau pneumatique / pneumatique: AB Inflatables, bateau d'occasion, hypalonLongueur x largeur: 2,90 m x 1,72 m, 2,90 x 1,72 m construit: 2023
Moteur: Mercury 9,9 MH, 15 cv (11 kW), moteur à essence
kr. 56 000
Lieu: Danemark, Svendborg
2023
Société: Band of Boats
Prix: kr. 56 000 (≈ € 7 509), HT
AB Inflatables Ventus 8 VL
Bateau pneumatique / pneumatique: AB Inflatables, bateau d'occasion, hypalonLongueur x largeur: 2,60 m x 1,68 m, 2,60 x 1,68 m construit: 2023
Moteur: Mercury F 9,9, 9 cv (6,6 kW), moteur à essence
kr. 64 000
Lieu: Danemark, Svendborg
2023
Société: Band of Boats
Prix: kr. 64 000 (≈ € 8 582), HT
AB Inflatables Lammina 9.5 AL
Bateau pneumatique / pneumatique: AB Inflatables, bateau d'occasion, hypalonLongueur x largeur: 2,90 m x 1,68 m, 2,90 x 1,68 m construit: 2024
Moteur: Mercury F 15 MH EFI, 15 cv (11 kW), moteur à essence
kr. 50 000
Lieu: Danemark, Svendborg
2024
Société: Band of Boats
Prix: kr. 50 000 (≈ € 6 704), HT
AB Inflatables Navigo 10 VS
Bateau pneumatique / pneumatique: AB Inflatables, bateau d'occasion, hypalonLongueur x largeur: 3,19 m x 1,72 m, 3,19 x 1,72 m construit: 2023
Moteur: Mercury F 15 MH EFI, 15 cv (11 kW), moteur à essence
kr. 73 000
Lieu: Danemark, Svendborg
2023
Société: Band of Boats
Prix: kr. 73 000 (≈ € 9 788), HT
Ces bateaux pneumatiques pourraient également vous intéresser
AB Inflatables Lammina 10 AL (3,19 m) AB Inflatables Navigo 10 VS (3,19 m) AB Inflatables Ventus 8 VL (2,60 m) AB Inflatables Lammina 10 UL (3,05 m) AB Inflatables Lammina 9 UL (2,76 m) AB Inflatables Lammina 9.5 AL (2,90 m) AB Inflatables Ventus 8 VL (2,60 m) AB Inflatables Mares 12 VSX (3,66 m) Yam 310S met Yamaha F5AMHS (NIEUW) (3,06 m) Highfield CL310 Hypalon Farbton grey (3,10 m) Quicksilver 250 Sport PVC Aluboden Schlauchboot (2,49 m) ZAR Formenti AIR 8 Nieuw !! (2,40 m)Quelle version voulez-vous voir ?
Envoyer une demande
AB Inflatables Ventus 9 VL, constr. 2022
Contact:
Band of Boats