Class 40 MACH V3 (velero) - en venta

The Sam Manuard designed Mach 40 V3 "Flamingo Rosso" is seriously for sale.
An evolution of the all conquering Mach 40, the V3 has a more powerful hull form particularly in the bow. they also have more centralised weight distribution.
Built using epoxy to class rules by JPS production in 2018 "Flamingo Rosso" is a fine example, she is ready to go for either Class 40 racing or just having a blast.

Designers comments on the Mach 40
This project - initiated by and for Aloys Claquin - brought together numerous skills and in particular those of Sandrine Lescaudron who put the final touches on the design of the appendages, those of Illy Brumer who provided the samples of the rigging and provided a innovative vision on this point and those of Remi Aubrun on the effectiveness of the sailing plan.
The plans were finalized following the 2010 Route du Rhum and with the aim of making a Large boat, so the aspects of comfort, protection and ergonomics were worked on accordingly. Consequently the deck plan is quite original.
For example, it seemed important to me to have a good view of the outside from inside the boat so as not to isolate yourself too much sensorially when you are inside the boat on standby. Being able to see your sails and have a vision towards the AV are important offshore when the conditions are harsh, the boat is under pilot and you have to adjust the sails or adjust the trajectory regularly so that the boat is as close as possible to its potential, as often as possible...
The cockpit area is divided into two areas. The deep and confined front part is dedicated to maneuvering as well as a watch station under the hood, the rear part is wider and shallower to provide an efficient helm station. The idea is to be able to maneuver safely and possibly be able to touch an adjustment without getting wet under the cover of the cap.
The boat benefits from careful construction - entirely made of epoxy infusion - a guarantee of Quality and Durability. The mainly transverse structure is abundant, the structural masses are concentrated around the CG of the boat. Sampling and construction comply with ISO 12215-5 cat A and OSR cat 0 criteria.
The rigging has an innovative geometry which allowed us to reduce its mass but more significantly to reduce its CG, which is important in optimizing the CLASS40 gauge. As a result, the bulb weight is reduced (less hydro drag) while achieving the maximum stability allowed by the gauge. Concentrating the masses, reducing the masses at the top, bottom and ends contribute to making a boat with good performance, aero and hydro disturbances linked to parasitic movements are limited.
The powerful hull is an evolution of the BM40 and my latest drawings of 650. The dynamic behavior of the boat is a priority, the evolution of the longi trim depending on the heel and the speed is a strong point of this boat.
The rudders can be raised for safety and performance reasons.
Electrics
Battery 4 x service batteries 55 Ah MasterVolt AGM.
Side lights and stern light Mantagua.
Shore power Mastervolt 25 A

Engine
Microsoft Word - Mach 40.docx
Volvo M1.30 years 2018
Propeller shaft with folding propeller
Gasoil tank 42 L
Motor foundation rebuild (2020)

Instrumentation
4 NKE Multigraphic Gyropilot display. - 1 anemometer Carbowind HR
1 Windsensor HR
Depth sensor
Speedo/loch paddle wheel sensor. - 2 GPS high frequencies
2 central calculators Gyropilot NKE. - Regatta compass
Processor HR NKE
Pilot HR NKE
2 tillers Raymarine
2 rudders angle sensor
Pilote remote control
Inertial unit 3 D Sensor Hull NKE
VHF fixe ICOM IC-M 323G
AIS transponder transmit/recept Class B Graphène + - GPS Furuno GP 39
Fleet Broadband 150 Sailor
Barometer Marine
Iridium 9575
VHF IC-M93D
Ocean Box

Computer
Microsoft Word - Mach 40.docx
PC mini Octofax
1 screen PC à LED 17’’3
Keyboard
Windows 10 pro installed and activated

Sails
Microsoft Word - Mach 40.docx
Main sail : Incidence Sail 2021

J1 : Incidence Sail 2022

J2 : All purpose 2021

J3 : North 2018

Code 0 : North 2018

A2 : Incidence Sail 2021

A4 : Incidence Sail 2022

A6 : Incidence Sail 2022

Older sails available if needed

Spars and Rigging
Head stay structural furling with Facnor FX (03/2021)
J2 stay furling with Facnor FX (10/2021), Internal Lock 3,5 t (03/07/2020)
Furling storm jib with Facnor FX (06/2018)
Furling Gennaker with Facnor FX (06/2018)
Carbon mast Axxon with one pair of spreaders
Carbon boom Axxon - Carbon bowsprit - Standing rigging - June 2018
Running backstays (03/2021) Running rigging :
Running rigging are best product in Dyneema SK 99 by Gottifredi Maffioli
Solent sheets 2022
Spinnaker sheets 2022
New in-hauler lines 2022
Jib sheets 2022

Safety Kit
Microsoft Word - Mach 40.docx
1 EPIRB
1 AIS Survivor Recovery System
1 liferaft Plastimo Transocéan > 24h 4 persons (12/2017) check 05/21 - 1 electrical bilge pump and 1 hand bilge pump
1 fixed compass
2 fire extinguishers of 2kg
1 fire blanket
116kg anchor+25m rope
1 Light anchor (Aluminium anchor + chain + rope)
1 fog horn
1 radar reflector
1 safety buoy with recovery line, drogue and light
4 safety red lights
2 orange smoke
3 life jackets auto with harness
1 searchlight
1 waterproof light
1 rescue sling
2 buckets

Misc
Boat cradle

The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
It is not guaranteed that the safety gear listed on the specification comes within the manufacturer's safety guidelines i.e. expiry dates and servicing and is therefore sold as is.... texto completo » menos texto