Corby 36 (barca a vela) - vendita

Excellently maintained racer. No expense has been spared to bring and keep this vessel at a very high level. The owner has sailed the ship with great love. The ship was built as a racing yacht and is therefore exempt from CE marking. VAT has been demonstrably paid.

Investments and renovations:

2017 – 2018
New aluminium mast
Rod rigging
Carbon steering wheel installed
2018 - 2019
Keel modification, based on Dick Koopmans' design to optimize the boats performance.
Cockpit modification, various adjustments made to optimize ergonomics while sailing.
Hardware removed, renewed where necessary, and installed.
Deck layout optimized
Hull and deck sprayed
2020 – 2021
Accommodation: rear section fully painted
Dog cage back panels installed
Dog crates optimized, beds extended
2021 – 2022
Accommodation: major maintenance from the bulkhead forward: everything painted, toilet new hoses and valves.
Replace entire cushion set
Duo-handed adjustments made
Webasto diesel heater installed
2023 – 2024
Underwater hull system modified to Hempel TF
Anti-slip reapplied to deck. (grey)
Refrigerator installed
2025
Applying a new layer of antifouling (Hempel TF)
Painted various minor damages. (Caused by standard use.)
Engine maintenance
To polish
There is an extensive set of sails with the boat.
A match set is only used for matches and is stored dry again after the match.
A delivery set is used for training and deliveries.

Overview of the sails:
BrandSail typeYearNorth SailsMainsail 3DI2019North SailsJib Light 3DI raw2018North SailsJib Medium 3DI raw2018North SailsJib Heavy Norlam2018North SailsJib #3.5 with reef to #4 Norlam2024North SailsS2 Spinnaker Light Superkote2011North SailsS2 Spinnaker Medium Superkote2018North SailsS2 Spinnaker Heavy2007North SailsNorlam Mainsail (Duo-handed)2021DoyleTraining/ touring set Mainsail/ J1.5/J2/J32014Doyle/ NorthVarious sailing trainingMiscellaneous

General:
Ship name Ondeugd, Corby 36, length 10.85 m, beam 3.15 m, draft 2.30 m, year of construction 2007, builder Corby Yachts Ltd, designer John Corby, round bilge, vinylester built with foam sandwich vacuum injection, displacement 4794 kg, ballast 2000 kg, carbon steering wheel, bilge pump (manual), Perspex windows, interior trim white, 7 berths, 4 fixed berths, 2 berths in the bunks and 1 berth in the bow, 3 cabins (non-closable), headroom in saloon near galley 1.85 m, headroom in saloon near mast 1.70 m, bed length forward 2.00 m, bed length alongside settees 2.00 m, bed length aft cabins 2.10 m.

Engine:
Yanmar 3YM30, 29 hp, serial number E11276, year of manufacture 2007, diesel, saildrive, indirect cooling, 2-blade folding propeller, 60-liter synthetic fuel tank, tachometer, hour meter display shows no reading.

Rigging:
Clearance height 20 m, fractional rigged, aluminium mast, carbon boom, rod rigging, 6 winches of which 2 triple speed winches and 4 self-tailing winches.

Navigation and equipment:
Starting battery 45 Ah, service battery 180 Ah, 12 Volt system, shore power connection with RCD, Victron battery charger, 4 x Raymarine Maxi wireless displays on mast bracket, Raymarine MN100-2 wireless display at chart table, Raymarine Axiom 7 chart plotter, Raymarine EV-200 autopilot with remote control, Furuno GP39 GPS, Furuno RD33 GPS repeater, Icom M506 VHF radio, Icom MA-500TR AIS with internal display, EPIRB Oceansignal, JVC radio/CD player, LED navigation lights.

Gas and water:
No water tank, Origo 3000 2-burner stove (spirit), refrigerator, Webasto diesel hot air heater, Jabsco underwater toilet,

Disclaimer:
All information is provided to the best of our knowledge and belief; however, yacht brokerage eSailing is not liable for the quality and/or description of the vessel.... testo completo » meno testo