Jeanneau Sun Fast 3300 (voilier) à vendre

Designed by naval architects, Daniel Andrieu and Guillaume Verdier, and constructed entirely by infusion moulding, the Sun Fast 3300 benefits from exceptional resistance and rigidity, with considerable weight reduction. Because of this, it delivers not only excellent performance, but it also benefits from an advantage with regard to IRC handicap rules, notably due to its single fin keel and its adapted sail area.
Combining the light hull with twin rudders, carbon rig, generous sail plan, and straight keel, the 3300 excels as an offshore racer. Sailing fully crewed, double, or single handed, the Sun Fast is a truly exhilarating boat, not to be missed.
SEA BEAR is well equipped for Offshore Racing with all the bells and whistles. This is a turnkey boat that can instantly launch you into the Sun Fast 3300 class. Dry sailed on the Hamble, she is in commission and available for viewings.

Yacht Information
Name: SEA BEAR - Hull No. 017
Boat: Sun Fast 3300
Builder: Jeanneau
Year: Launched in Spring 2020
Designer: Guillaume Verdier / Daniel Andrieu
Water ballast system - 200L each side
2024 IRC Rating: 1.025 (Endorsed with 2 Jibs and 4 Spinnakers)
Yard storage cradle with hull formers
Location: Hamble Yacht Services - dry sailed

Engine
Yanmar 2YM15 - 14hp inboard diesel engine
Shaft drive
Sterling Pro Save A Galvanic Isolator 16A
Engine throttle in cockpit with removable handle
Engine panel in cockpit
125AH alternator
2 blade folding GORI racing propeller
50L Roto-moulded diesel fuel tank on centreline
Removable GRP companionway & side hatches for easy access to engine
Fuel gauge

Mast and Rigging
Axxon Carbon mast - deck stepped, twin aft swept spreaders.
Nitronic 50-15 Rod forestay
Dyform sthrouds. Textile backstays.
Axxon Carbon boom
Carbon bowsprit with both 1:1 and 2:1 tack lines + running rigging for asymmetric & Code sails
Textile adjustable backstays with fine tune & return to primary winches
Runner blocks have protective pads and can be held forward in light airs.
All the running rigging is dyneema
2 x Genoa halyards
1 x Mainsail halyard
2 x Masthead spinnaker halyards (one of which converts to Fractional halyard)
2 x Genoa sheets + In-haulers + down-haulers
2 x Spinnaker sheets
2 x Code 0 sheets
Runner retrieval lines
Mainsheet with coarse and fine tune
Double ended mainsheet traveller line
Multi-purchase mainsail outhaul
Mainsail reefing lines
Barton boom vang
Cunningham system
Mainsail reefing strops
Tack points for both Genoa and Spinnaker Staysails

Deck Hardware
Stainless steel WS compliant pushpits, pulpit, stanchions and wire guardrails
Canvas covered guard wire piping in way of cockpit
Jib retaining bungee straps on foredeck
Mooring cleats to port & starboard aft
Moulded toe rail, WS compliant, and comfortable for crew hiking
Full length mainsail traveller across cockpit floor
2 x Harken 40.2 Performa primary winches
2 x Harken 40.2 Performa coach roof winches
4 x Harken "One Touch" winch handles
Harken and Spinlock deck gear - jammers, clutches, fairleads - with many additions over and above the standard spec
Dedicated sunken life raft stowage area
Central trimming pedestal
Adjustable foot rack for helmsman
Ceramic cam upgrades on some of the rope clutches
Rope bags & winch handle pockets in cockpit
Mainsail cover
Mooring kit - fenders & warps
Anchor kit - Fortress FX-11 + chain + warp

B and G Instruments and Electronic Packs
Zeus3 9" MFD mounted in cockpit
Navionics chart 28XG
H5000 Hercules base pack (includes Graphic MFD at stb & port helms)
H5000 Pilot Computer (includes Precision 9 compass, rudder reference unit, RF300 rudder feedback unit)
Raymarine Type 1 linear drive short shaft 12v pilot ram
2 x H5000 Pilot Controllers (one at each helm)
WR10 Autopilot remote control + base station
H5000 Motion Sensor
3 x 20/20 Mast displays (including mast bracket)
B&G v60 VHF with DSC + remote handset
Hawk VHF antenna
GO FREE Wi-Fi system
NAIS 5000 transceiver (includes GPS, antenna splitter)
Carbon VHMU (vertical mast head unit for wind) + bracket
Fusion RA670 Apollo entertainment system with 4 x waterproof speakers
H3000 Speed sensor + flush mount fitting
DT800 Depth / Temperature sensor + flush mount fitting

Systems and Domestics
EFOY Comfort 140i Methanol fuelled DMFC fuel cell
Super B battery monitor
Super B Lithium ION domestic battery (equivalent to 90AH) + Odyssey 680 12v/16AH engine start
Extra Blue Seal 12v DC socket / USB charge socket
Dual 110v/220v Shore power + waterproof dual voltage 20AH Victron battery charger + 220v socket + 20m lead all c/w Consumer Unit with RCD and Two MCB's with replacement RCD (110v) for North America & Outlet, UK type with replacement US type
Webasto 3 outlet diesel cabin heating
Iridium Certus 100 satellite telephone + external antenna
Cyclops forestay load cell integrated to B&G instruments
FourthCape electronic rudder toe angle adjuster system
Slave computer screen at Nav table with cables for laptop connection

Safety Equipment
Tri-colour light at mast head
Anchor light
LED sail trimming light on mast
LED Deck Navigation lights (port / starboard / stern)
Additional internal manual bilge pump for Cat.2 Regs
Hatch retaining mechanism for Cat.2 Regs
Jackstays on side decks & cockpit floor
Ocean Ultralite 6 man liferaft – Carbon cannister
Ocean Safety Jonbouy/Danbouy combo in white case
Lots of additional Cat. 2 safety gear will be sold with the boat

Interior
Sea water foot pump in galley
Lee cloth kit in saloon
Canting berths in aft cabins
Plumbed sea toilet
2 burner gas hob (in store)
2 x Double aft cabins with removable fabric doors
2 x single berths in saloon
Wooden factory supplied floorboards upgraded to foam cored laminate

North Sails
2020 Sails by North
Mainsail 3Di
J1 jib 3Di
J2 jib 3Di
J3 jib 3Di
A1.5 Asymmetric spinnaker
A2 Asymmetric spinnaker
A3 Asymmetric spinnaker
A5 Asymmetric spinnaker
MHO - Masthead Code Zero with furler
2021 Sails by North
Mainsail 3Di
FRO - Fractional Code Zero
2022 Sails by North
J1 jib 3Di
Other Sails by North
Storm Jib / Genoa Staysail
Spinnaker Staysail

Construction
HULL: Infused GRP sandwich with balsa core. Infused structural liner glued into place
DECK: Infused GRP sandwich with foam core
BULKHEADS: Infused GRP sandwich moulded companionway, mast and forward bulkheads
STEERING: Twin polyester rudders with stainless steel rudder stock. Self-aligning rudder bearings. Composite tiller with tiller extension. GRP support for autopilot ram
KEEL: Straight IRC optimised flat keel, mixed lead/iron with epoxy surface treatment

Manufacturer Provided Description
Jeanneau Sun Fast 3300 is the brain child of Guillaume Verdier and Daniel Andrieu, whose collaboration guarantees high performance and success under a variety of rating rules.
Taking advantage of Jeanneau’s long history of infusion manufacturing, every part of the 3300 is infusion muolded, dramatically reducing the all-up weight of the boat while increasing stiffness. Combining the light hull with twin rudders, carbon rig, generous sail plan, and straight keel, the 3300 will excel as an offshore racer. Sailing fully crewed, double, or single handed, this Sun Fast is a truly exhilarating boat, not to be missed.
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.
It is not guaranteed that the safety gear listed on the specification comes within the manufacturer's safety guidelines i.e. expiry dates and servicing and is therefore sold as is.... texte entier » moins de texte