Add to watchlist
Remove boat from favorites
14
Would you like to have your watchlist on all your devices? Log in or register for free.
300
Only 300 listings can be saved to the watchlist. To save additional listings, you must first remove some listings from the watchlist.
boatDetail
boatDetail
0
bid=s313243
bid=s313243
s313243
5
Custom Cutter Rigged Sloop (sailboat) for sale
sailboat / sloop, sailing yacht, cruising yacht, used boatPictures
1 / 12
▶
▶
pictures
share
Description +
YQUEM is a 31.70-metre custom cutter-rigged sloop designed by Bill Tripp and built in 1992 by the American yard Windship-Trident. Previously sailing as Lunar Mist and later as Cinderella II, she now carries the name of one of the great Sauternes estates. Exterior lines by Bill Tripp, interior by Donald Starkey: she belongs to that rare category of blue-water yacht that simply never dates.
She lies in Valencia, Spain, under Maltese commercial flag and is offered VAT paid. Her epoxy composite hull, reinforced with Kevlar over a PVC foam core, combines lightness with genuine strength, while her teak deck gives her the classic presence that has always defined her.
Following twelve months at Solent Refit in 2012, YQUEM was entirely refitted between May 2025 and August 2026, an extensive programme reaching hydraulics, electrics, plumbing, propulsion, rigging, navigation electronics and interiors alike. Her 460 hp LUGGER main engine, fully refurbished, showed zero hours in August 2026, and the hydraulic systems are now governed by a custom-made PLC. Hull, keel, mast, boom, rigging and shaft have all been independently surveyed.
Her deck is arranged around two separate cockpits, a layout that protects guest privacy: amidships, a spacious and sheltered cockpit with its two dining tables; aft, the working cockpit with twin wheels. The SPARCRAFT carbon mast, born of the partnership formed for the 1992 America's Cup, remains notably solid, while the Park Avenue boom makes handling the mainsail remarkably straightforward. New running rigging, a 2026 SANDERS mainsail and a hydraulic furler complete a sail plan of 535 m2 upwind and 1,110 m2 downwind: this cutter reaches 12.5 knots at top speed, holds 9 knots cruising and carries a 1,900-nautical-mile range.
Below, a deck house with 360-degree views opens between deck life and saloon. Generous and luminous, the saloon combines lounge and dining area for eight guests; repainted white and fitted with an additional window, new couches and reworked lighting, it regained all its brightness during the refit. The galley, set aft of the saloon, is exceptionally roomy and beautifully arranged around its centre island. The owner's cabin is a large double with en suite shower and bath, joined by three double cabins each with its own bathroom. The crew have three separate cabins, including a twin cabin, along with a crew mess and a separate entrance from the aft cockpit.
SPECIAL FEATURES
- Comprehensively refitted between May 2025 and August 2026 - hydraulics, electrics, plumbing, propulsion, rigging, navigation electronics and interiors
- LUGGER L6125A 460 hp main engine fully refurbished with new cylinders and pistons - zero hours as of August 2026
- Brand new 30 kW NANNI sound-proofed generator; 27 kW and 17 kW KOHLER generators fully serviced August 2026
- New 260 m2 SANDERS mainsail (2026) and new Spectra running rigging; RECKMANN hydraulic headsail furler
- SPARCRAFT carbon mast by Omohundro and SPARCRAFT Park Avenue composite boom - 535 m2 upwind / 1,110 m2 downwind
- Epoxy composite hull reinforced with Kevlar over a PVC foam core - teak deck
- New 180 l/h IDROMAR water maker (2026); ALFA LAVAL fuel separator and sewage treatment
- STARLINK internet and IRIDIUM satellite communications
- B&G navigation suite: Z12 chart plotter, B&G and FURUNO radar, AIS transmitter, SIMRAD hydraulic autopilot
- Eight guests in four en suite double cabins - owner's cabin with shower and bath
- Three separate crew cabins with crew mess and dedicated entrance from the aft cockpit
- Deck house with 360-degree views; saloon repainted white with an additional window, new couches, LED lighting and Corian surfaces (2025/26)
- Exceptionally roomy galley around a gimballed centre island - GAGGENAU oven and hob, dishwasher, 4 refrigerators, 2 deep freezers
- MAXWELL 5000 windlass fully refurbished, PTO driven, with 115 m of new 18 mm chain
- 50 hp RICHFIELD retractable bow thruster; aft garage door on hydraulic rams with swim ladder and floating platform
- HUNDESTED VP5 FR-HY variable pitch propeller with new PSS shaft seal, new anodes and PROPSPEED
- NOVURANIA 400 DL tender with 50 hp YAMAHA outboard, waterskis, 2 wakeboards and inflatable paddleboards
- Independent 2026 surveys of hull, keel, mast, boom, rigging, rudder stock, propeller and shaft
- Maltese commercial flag - VAT paid - lying Valencia, Spain... whole text
She lies in Valencia, Spain, under Maltese commercial flag and is offered VAT paid. Her epoxy composite hull, reinforced with Kevlar over a PVC foam core, combines lightness with genuine strength, while her teak deck gives her the classic presence that has always defined her.
Following twelve months at Solent Refit in 2012, YQUEM was entirely refitted between May 2025 and August 2026, an extensive programme reaching hydraulics, electrics, plumbing, propulsion, rigging, navigation electronics and interiors alike. Her 460 hp LUGGER main engine, fully refurbished, showed zero hours in August 2026, and the hydraulic systems are now governed by a custom-made PLC. Hull, keel, mast, boom, rigging and shaft have all been independently surveyed.
Her deck is arranged around two separate cockpits, a layout that protects guest privacy: amidships, a spacious and sheltered cockpit with its two dining tables; aft, the working cockpit with twin wheels. The SPARCRAFT carbon mast, born of the partnership formed for the 1992 America's Cup, remains notably solid, while the Park Avenue boom makes handling the mainsail remarkably straightforward. New running rigging, a 2026 SANDERS mainsail and a hydraulic furler complete a sail plan of 535 m2 upwind and 1,110 m2 downwind: this cutter reaches 12.5 knots at top speed, holds 9 knots cruising and carries a 1,900-nautical-mile range.
Below, a deck house with 360-degree views opens between deck life and saloon. Generous and luminous, the saloon combines lounge and dining area for eight guests; repainted white and fitted with an additional window, new couches and reworked lighting, it regained all its brightness during the refit. The galley, set aft of the saloon, is exceptionally roomy and beautifully arranged around its centre island. The owner's cabin is a large double with en suite shower and bath, joined by three double cabins each with its own bathroom. The crew have three separate cabins, including a twin cabin, along with a crew mess and a separate entrance from the aft cockpit.
SPECIAL FEATURES
- Comprehensively refitted between May 2025 and August 2026 - hydraulics, electrics, plumbing, propulsion, rigging, navigation electronics and interiors
- LUGGER L6125A 460 hp main engine fully refurbished with new cylinders and pistons - zero hours as of August 2026
- Brand new 30 kW NANNI sound-proofed generator; 27 kW and 17 kW KOHLER generators fully serviced August 2026
- New 260 m2 SANDERS mainsail (2026) and new Spectra running rigging; RECKMANN hydraulic headsail furler
- SPARCRAFT carbon mast by Omohundro and SPARCRAFT Park Avenue composite boom - 535 m2 upwind / 1,110 m2 downwind
- Epoxy composite hull reinforced with Kevlar over a PVC foam core - teak deck
- New 180 l/h IDROMAR water maker (2026); ALFA LAVAL fuel separator and sewage treatment
- STARLINK internet and IRIDIUM satellite communications
- B&G navigation suite: Z12 chart plotter, B&G and FURUNO radar, AIS transmitter, SIMRAD hydraulic autopilot
- Eight guests in four en suite double cabins - owner's cabin with shower and bath
- Three separate crew cabins with crew mess and dedicated entrance from the aft cockpit
- Deck house with 360-degree views; saloon repainted white with an additional window, new couches, LED lighting and Corian surfaces (2025/26)
- Exceptionally roomy galley around a gimballed centre island - GAGGENAU oven and hob, dishwasher, 4 refrigerators, 2 deep freezers
- MAXWELL 5000 windlass fully refurbished, PTO driven, with 115 m of new 18 mm chain
- 50 hp RICHFIELD retractable bow thruster; aft garage door on hydraulic rams with swim ladder and floating platform
- HUNDESTED VP5 FR-HY variable pitch propeller with new PSS shaft seal, new anodes and PROPSPEED
- NOVURANIA 400 DL tender with 50 hp YAMAHA outboard, waterskis, 2 wakeboards and inflatable paddleboards
- Independent 2026 surveys of hull, keel, mast, boom, rigging, rudder stock, propeller and shaft
- Maltese commercial flag - VAT paid - lying Valencia, Spain... whole text
close selection
Boat data +
Boat data Custom Cutter Rigged Sloop
Price:
€ 2,250,000
VAT incl., EU taxed
Boat ID:
s313243
Boat model:
Custom Cutter Rigged Sloop
Boat name:
YQUEM
Manufacturer:
Designer:
Tripp Design Naval Architects
Boat type:
sailboat
Boat category:
sloop, sailing yacht, cruising yacht
Category:
used boat
Year built / refit:
1992 / 2026
Launched:
1992
Condition:
good
Location:
Spain, Valencia
Flag:
Malta
Registration type:
commercial
Cabins / berths:
7 / 13 (thereof crew berths: 5)
Master cabins:
1
Guest cabins:
3
Crew cabins:
3
Hull material:
Kevlar/Carbon
Hull colour:
white
CE certification:
exempt
Steering:
two steering wheels
Sail area:
535 m²
Main sail:
260 m²
Jib:
275 m²
Mast material:
carbon
Technical data
Length:
31.70 m (104 feet)
Beam / draught:
7.20 / 3.80 m
Weight:
ca. 98,000 kg
Showers:
6
No. of toilets:
6
Heating:
heating with air cond.
Engine:
Lugger L6125A
Engine power:
460 hp (338 kW)
Fuel:
diesel
Propulsion:
shaft drive
Propeller:
variable pitch propeller
Number of cylinders:
6
Year built:
1992
Cruis. speed:
9 kn
Max. speed:
12.5 kn
Consumption for cruis. speed:
35 ltr/hour
Engine range:
1,900 nmi
Fuel tank:
4 x 1,819 ltr
Fuel tank - material:
GRP
Fresh water tank:
2 x 1,893 ltr
Fresh water tank - material:
GRP
close selection
Advertising / service
Equipment+
Buy Custom Cutter Rigged Sloop - equipment sloop - sailboat for sale
NavigationAIS - Automatic Identification System, autopilot, echo sounder, GPS, plotter, GPS plotter, position lights, radar, speed log, VHF radio, wind indicator
Technical equipment
220V plugs, air conditioning, anchor, bow anchor windlass, battery, battery charger, generator, inverter, main circuit breaker, pressurized water system, shore supply 220V, bow thruster, warm water system, wetbar
Safety
bilge alarm, automatic bilge pump, electric bilge pump, dan buoy, distress signals, emergency tiller, EPIRB, fire extinguisher, fire extinguisher system, life jackets, life raft, MOB system, smoke alarm
Deck equipment
bathing ladder, hydraulic bathing platform, bimini top, deck hatch, dinghy with motor, fenders, gangway, guard rail, pulpit, pushpit, stern rail, sun shade, teak deck, transom door to bathing platform
Layout of the boat - cabins
rear entrance, guest cabin, head, owner cabin, salon, separate crew cabine, outside steering position
Interior equipment
2nd refrigerator, bathtub, dishwasher, extractor hood, freezer, hob, icemaker, microwave, oven, refrigerator, sink, washing machine
Entertainment instruments
DVD, internet, radio, satellite internet, satellite phone, television
Sails
jib, fully battened main, reefing gear, roller-furling genoa
Other equipment
cockpit table, holding tank, suncushion, underwater paint, watermaker
close selection
Contact-
Custom Cutter Rigged Sloop - info without obligation - sloop
pf-5855
Please tell the boat owner you found this offer on Yachtall.
Contact:
Bernard Gallay Yacht Brokerage
Mr. Bernard Gallay
1 Rue Barthez
34000 Montpellier
France
Phone:
show
Languages:
English, French
www.bernard-gallay.com
On yachtall.com for 16 years Response rate above averageclose selection
Buy a boat:
Custom built/Eigenbau boats sloops sailboats for sale sailboats Spain used boats used boats Custom built/Eigenbau
Custom built/Eigenbau boats sloops sailboats for sale sailboats Spain used boats used boats Custom built/Eigenbau
Other boats (like Custom Cutter Rigged Sloop) - for buy and for sale
CNB 100
Sailboat / mega yacht (sailing): CNB, used boatLength x beam: 30.50 m x 6.82 m, 30.50 x 6.82 m built: 2009, cabins: 5
Engine: Cummins QSB5.9M, 355 hp (261 kW)
€ 3,950,000
Location: Italy, Manfredonia
2009
Company: Bernard Gallay Yacht Brokerage
Price: € 3,950,000, VAT incl.
WHIMSEA, a 30.50-metre luxury CNB 100 carbon sailing yacht, combines contemporary design, outstanding sailing performance and long-range cruising comfort.
True Ketch-Rigged Sailing Yacht (gulet Type)
Sailboat / ketch: Yardimci Gemi, used boatLength x beam: 31.25 m x 7.20 m, 31.25 x 7.20 m built: 2005, cabins: 10
Engine: Cummins 6CTA8.3MI, 2 x 250 hp (184 kW), diesel
€ 790,000
Location: Tunisia, Monastir
2005
Company: Bernard Gallay Yacht Brokerage
Price: € 790,000, VAT excl.
For sale: AKHENATON sailing yacht, 31.25m wooden ketch fully refit in 2024. 5 guest cabins, 10 berths, 1,000 NM range.
Tréhard Sloop
Sailboat / sloop: Tréhard Constructions Navales, used boat, aluminum boatLength x beam: 31.80 m x 7.40 m, 31.80 x 7.40 m built: 1998, cabins: 7
Engine: Cummins QSB 6.7, 380 hp (279 kW), diesel
€ 1,750,000
Location: France, Sète
1998
Company: Bernard Gallay Yacht Brokerage
Price: € 1,950,000 € 1,750,000, VAT incl.
Aluminium Trehard sloop of 31.80 m designed by Jacques Fauroux, ex-OCEAN'S SEVEN². Major refit in 2019/2020, including a new 380 HP Cummins engine. Accommodation for 8 guests in 4 en-suite cabins and 5 crew. Lying in Sète, France.
Phithak Shipyard S&S 104 RS
Sailboat / mega yacht (sailing): Phithak Shipyard, used boat, aluminum boatLength x beam: 31.60 m x 7.19 m, 31.60 x 7.19 m built: 2011, cabins: 7
Engine: Caterpillar C12, 480 hp (353 kW), diesel
€ 2,700,000
Location: Thailand, Phuket
2011
Company: Bernard Gallay Yacht Brokerage
Price: € 2,700,000, VAT excl.
SILVERLINING, a 31.60 m Sparkman & Stephens S&S 104 RS blue water cruising yacht with an aluminium hull, built in 2011 and refitted in 2022/23, accommodates 8 guests in 4 cabins. Lying in Phuket, Thailand.
These sailboats could also be of interest to you
30M MS WITH LOYD Certificate (31 m) Gulet 28 m (31 m) Gulet Caicco ECO 226 (33 m) Beliard Crighton 100 (30.27 m) Gulet Caicco ECO 474 (31 m) Gulluk Shipyard 99'7 (30.40 m) 32m Motorsailer - Gulet (32 m) Gulet Caicco ECO 765 (30.60 m) Gulet Caicco ECO 439 (30 m) 31M Gulet (31 m) 31 M Bodrum Gulet (31.09 m) Motor Sailer Gulet (31.30 m)
Which version do you wish to see?
Send request
Custom Cutter Rigged Sloop, built 1992
Contact:
Bernard Gallay Yacht Brokerage
Mr. Bernard Gallay
Mr. Bernard Gallay
