Beenhakker Vlet 720 (powerboat) for sale

Beenhakker Vlet 720 now in the online auction. everyone can bid until 16 November 2026.
Beenhakker Vlet 720 with Mercedes diesel engineWhat kind of boat is the Beenhakker Vlet 720?The Beenhakker Vlet 720 is a steel launch with a chine hull, built for relaxed trips on inland waterways. With a length of 7.20 metres and a beam of 2 metres, she offers a practical combination of space and easy handling. Her draft is approximately 30 centimetres, making the boat suitable for many shallow-water cruising areas. The air draft is approximately 90 centimetres.
Inside, she has approximately 110 centimetres of headroom. The helm is located inside and operated with a steering wheel. The single rudder installation matches the simple and straightforward character of this launch. The boat has an estimated weight of approximately 1,750 kilograms and has previously been used for day trips on inland waterways.
Beenhakker Vlet 720 now in the online auction. Everyone can place a bid until 16 November 2026.What is the layout like on board?The interior is finished in mahogany and has a warm appearance. The cockpit features a spacious wraparound seating area with loose cushions. This makes her suitable for relaxed cruises with family or friends, as well as for a leisurely day on the water with a smaller group. The available cockpit canopy and cockpit tent provide shelter from wind and light rain.
Fenders and lines are present on deck. At the stern, she has a swimming platform with a bathing ladder. An electric bilge pump is fitted to remove any water from the bilge. The equipment is therefore geared towards practical use and straightforward day cruising.
What engine does this boat have?The Beenhakker Vlet 720 is equipped with a single Mercedes OM 636 diesel engine. This four-cylinder inboard engine is electrically started. The fuel tank has a capacity of approximately 40 litres. An oil pressure gauge, temperature gauge and tachometer are present for monitoring the engine while under way. The electrical system operates at 12 volts, and one battery with a total capacity of 120 ampere-hours is installed. The alternator is made by Bosch.
According to the available information, the engine is operational but requires further attention. The gearbox does not work properly and the engine overheats. A thermostat or water pump is mentioned as a possible cause. These components may need to be replaced. It is important to take this technical issue into account when assessing the boat and preparing your budget.
What work is known to be required?According to the available information, the boat is in reasonable condition. She was last taken out of the water for maintenance in 2024 and received antifouling treatment in the same year. No additional maintenance documents are available. It is therefore advisable to carefully inspect the hull, engine room, propulsion system, electrical installation and interior during the viewing day.
The known technical points are particularly important. The gearbox not working properly and the engine overheating especially warrant further investigation before placing a bid. The final costs will depend on the cause and the condition of the relevant components. The description does not guarantee any particular technical outcome.
Who might be interested in this launch?This boat may be of interest to someone looking for a spacious steel launch for relaxed trips on inland waterways and who is prepared to undertake technical work. The wide hull and shallow draft make her suitable for leisurely use, while the mahogany finish and wraparound seating add atmosphere on board. She will appeal to a buyer who values a sheltered helm position, practical outdoor space and a classic appearance.
For anyone searching for a boat to buy, this Beenhakker Vlet 720 is a model with clear signs of use and a specific technical issue. Anyone considering buying a second-hand boat should not only look at the layout and appearance, but also at the engine, propulsion system and maintenance history. Good boat-buying advice starts with a realistic assessment of the condition and the expected costs.
What should you look out for during the viewing day?During the viewing day, you can inspect the boat up close. Pay attention to the general condition of the steelwork, the finish of the mahogany, the cushions, the canopy and the cockpit tent. Also inspect the engine room and check for visible leaks, signs of overheating or other points requiring attention. The viewing day is the opportunity to assess her condition as carefully as possible and ask questions about the available information.
As no documentation is available, it is recommended that you base your bid on what you establish yourself during the viewing day. The boat is offered in her current condition. The combination of a spacious open cockpit, classic finish and Mercedes diesel engine makes her interesting, but the required engine work must be taken into account when making your decision.... whole text » less text