Add to watchlist
Remove from favorites
14
Would you like to have your watchlist on all your devices? Log in or register for free.
300
Only 300 listings can be saved to the watchlist. To save additional listings, you must first remove some listings from the watchlist.
boatDetail
boatDetail
0
bid=s269496
bid=s269496
s269496
5
Archi Edson Chock 38 (sailboat) for sale
sailboat, old-timerPictures
1 / 12
▶
▶
pictures
share
Description +
This is a machine translation.
Original text: French | Translated text
2021 SCOTTO SHIPYARD, MARSEILLE, FRANCE
- Localised refit of the hull underside with A4 stainless steel screws, 6 mm - Repair of the mast around the spreader bases and jumper stay fittings.
- Reinforcement of the spreader base fittings.
- Replacement of the mast partners.
- New mast gasket collar and set of wedges.
- Repair of the deck beam/shelf at the mast.
- Installation of 3 new oak knees on the port side.
- Repair of 3 solid oak frames.
- Painting of the entire hull with AWL CRAFT 2000 F5050.
2016 LOBRICHON & INFINITY SHIPYARDS, LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower frames at the mast step.
- New mast step.
- New engine mounts and propeller shaft.
- Engine box with insulation.
- Installation of a new Nanni N2.10 inboard diesel engine and a gearbox.
2009 - 2010 IN SIDNEY, BRITISH COLUMBIA, CANADA
- Reframing of the boat in white oak.
- Original planking in fluted mahogany with West Coast red cedar coated in epoxy.
- New deck in West Coast red cedar, covered with biaxial fabric and epoxy.
- Hull faired and painted with a two-part polyurethane product from Ditsler.
- The owners recorded 2,600 hours of work devoted to this process.
- This figure is considered reasonable given the scale of the project and the finish details achieved.... whole text
- Localised refit of the hull underside with A4 stainless steel screws, 6 mm - Repair of the mast around the spreader bases and jumper stay fittings.
- Reinforcement of the spreader base fittings.
- Replacement of the mast partners.
- New mast gasket collar and set of wedges.
- Repair of the deck beam/shelf at the mast.
- Installation of 3 new oak knees on the port side.
- Repair of 3 solid oak frames.
- Painting of the entire hull with AWL CRAFT 2000 F5050.
2016 LOBRICHON & INFINITY SHIPYARDS, LE BORGNE, MORBIHAN, FRANCE
- Refurbishment of approximately 1.5 m of wooden keel and lower frames at the mast step.
- New mast step.
- New engine mounts and propeller shaft.
- Engine box with insulation.
- Installation of a new Nanni N2.10 inboard diesel engine and a gearbox.
2009 - 2010 IN SIDNEY, BRITISH COLUMBIA, CANADA
- Reframing of the boat in white oak.
- Original planking in fluted mahogany with West Coast red cedar coated in epoxy.
- New deck in West Coast red cedar, covered with biaxial fabric and epoxy.
- Hull faired and painted with a two-part polyurethane product from Ditsler.
- The owners recorded 2,600 hours of work devoted to this process.
- This figure is considered reasonable given the scale of the project and the finish details achieved.... whole text
close selection
Boat data +
Boat data Archi Edson Chock 38
Price:
€ 89,500
VAT incl.
Boat ID:
s269496
Boat model:
Archi Edson Chock 38
Manufacturer:
Boat type:
sailboat
Category:
old-timer
Year built:
1923
Location:
Technical data
Length:
11.60 m (38 feet)
Beam / draught:
2.45 / 1.70 m
Engine:
Nanni Diesel N2.10
Fuel:
diesel
close selection
Archi Edson Chock 38+
Archi Edson Chock 38 at a glance
On offer is this Archi Edson Chock 38 from 1923, a boat in the category sailboat. It was built by Custom built/Eigenbau. With a length of 11.60 m, it has a beam of 2.45 m. The draft is 1.70 m. It is powered by a single Nanni Diesel N2.10 engine. Fuel: diesel. The boat is currently located in France. It is offered by Band of Boats for € 89,500 (VAT incl.).
close selection
Advertising / service
Contact-
Archi Edson Chock 38 - info without obligation - sailboat
pf-21790
Please tell the boat owner you found this offer on Yachtall.
Contact:
Band of Boats
CAP MED Boat & Yacht Consulting
132 Avenue Maurice Chevalier
06150 Cannes
France
Mobile:
show
Languages:
English, French
On yachtall.com for 7 yearsclose selection
Buy a boat:
Custom built/Eigenbau boats sailboats for sale sailboats France used boats used boats Custom built/Eigenbau
Custom built/Eigenbau boats sailboats for sale sailboats France used boats used boats Custom built/Eigenbau
Other boats (like Archi Edson Chock 38) - for buy and for sale
Sloop Yacht
Sailboat / sloop: Custom built/Eigenbau, used boat, GRP/polyesterLength x beam: 12.40 m x 3.80 m, 12.40 x 3.80 m built: 1970, cabins: 3
Engine: Nanni Diesel N438, 37 hp (27 kW), diesel
£ 9,995
Location: Great Britain, Brightlingsea
1970
Price: £ 9,995 (≈ € 11,937), VAT incl.
Custom built Open 40
Sailboat / sloop: Custom built/Eigenbau, used boat, wooden boatLength x beam: 11.40 m x 3.70 m, 11.40 x 3.70 m built: 2000, cabins: 2
Engine: Nanni Diesel N3.30, 28 hp (21 kW), diesel
€ 69,000
Location: France, Les Portes de l’Atlantique, Frossay
2000
Price: € 69,000, VAT incl.
Custom built Domino 39
Sailboat / sloop: Custom built/Eigenbau, used boatLength x beam: 11.87 m x 3.72 m, 11.87 x 3.72 m built: 1981, cabins: 2
Engine: 28 hp (21 kW), diesel
€ 26,000
Location: Italy, Fiumicino
1981
Price: € 26,000, VAT incl.
Custom built Aloha
Sailboat: Custom built/Eigenbau, old-timerLength x beam: 11.60 m x 2.45 m, 11.60 x 2.45 m built: 1923
Engine: 10 hp (7.4 kW), diesel
€ 96,500
Location: France, Toulon
1923
Price: € 96,500, VAT incl.
These sailboats could also be of interest to you
W Trost OF Emden (10.97 m) Great DANE 37 (10.97 m) Randonneur 1200 (11.99 m) Catamaran Custom ONE-OFF 38 (11.50 m) Custom Built Sloop (11.80 m) Custom built Fajgun 38 (11.40 m) Shuttleworth 39' Trimaran (11.90 m) 12m Wooden Classic Tirhandil (12.20 m) Custom built CD 38/36 (12 m) Cuttyhunk 41 (12.10 m) Silvervingen International SIX Meter (10.97 m) Tore Holm Velella (12.30 m)Which version do you wish to see?
Send request
Archi Edson Chock 38, built 1923
Contact:
Band of Boats




























