Lundi Boats 195 (barco a motor) - Venda

Aluboat Lundi 195 Wheelhouse SK incl. motor and trailer

dimensions
Length a.s.l.: 5,94 m
Width a.s.l.: 2,30 m
Draught hull approx.: 0,35 m
weight: ca. 1,25 t
gasoline tank: approx. 100 l
Engine: Suzuki 70 PS
less than 20 operating hours
Price: 46.900 € incl. engine, trailer and complete equipment
Value added tax is paid.

The boat is year of construction 2022 and is sold from private for health reasons
It is suitable for fishing and boat trips.
The boat ladder facilitates bathing and diving.
Due to the high speed it is also suitable for water skiing.

It can be visited in Greifswald after arrangement.
Please feel free to call us.

CONSTRUCTION

Design and construction according to CE standard, category C
Sliding hull , multi-buckling bulkhead
Combined transverse and longitudinal bulkhead construction
Marine aluminum ( ALMg4,5Mn):
Hull 5/4mm, frames and bracings 6mm, bottom 5mm checker plate.

EQUIPMENT

Hull as described with wheelhouse and slip cabin superstructure
Hinged door in superstructure
ESG fixed window in EPDM profile in superstructure Bb/Stb side
2-piece front window: ESG glass in EPDM profile
Roof hatch
storage in the fuselage sides
large bench/break box in the back
Folding stainless steel swim ladder with profiled steps
plastic bulkheads in the passage to the bathing platform
fuel tank 100 liters with fuel gauge and filler neck, fuel filter
Fuel gauge for fuel tank
Seawater resistant windshield wiper system
Sacrificial anodes according to cruising area
Electric bilge pump, forward and aft with automatic float switch and warning system, extra manual bilge pump
Starter battery 100 Ah
Onboard battery 100 Ah
Charging relay ACR 12 for batteries
Large switch panel with automatic fuses for all consumers
12 V/ USB socket at helm
LED lighting with position lights, top and anchor lights
LED interior lighting
Signal horn
Shore connection unit with automatic charger, sockets 230V and 12V and CEE shore connection cable incl. socket
Solar system: 2x solar panel Mare Flex 155 W 12V current at max power 5,96 A, charge controller MPP 350
Driving equipment

EQUIPMENT

interior in aluminum
long shelf on bb-side with steering chair / small cabinet with sink long shelf on stb-side with steering chair / small seat behind it
steering position with aluminum console
Refrigerator Dometic Coolmatic CRX 50
Yacht-WC Dometic 972 incl. additional tank

RAILS AND FITTINGS

All-round handrail with bow pulpit in aluminum, welded
Top light mast and handrails on the side of the roof in aluminum
6 stainless steel rod holders

COLOR SYSTEM

Complete priming of the underwater hull
Antifouling AluSafe black

MOTORIZATION

Suzuki outboard engine DF70 ATL 51,5 kW (70 hp)
with hydraulic steering and steering wheel, aluminum propeller, analog display

INSTRUMENTS

Lowrance fishfinder/GPS chartplotter HDS-7 LIVE with ACTICE Imanging 3-in-1 depth sounder transducer
Navionics 45XG electronic nautical charts

Other extras:

- Refrigerator Dometic Coolmatic
- Automatic charger Philippi AL 12/15
- CEE shore power cable with socket
- Yacht-WC Dometic 972 incl. additional tank
- Solar system (2x solar panel MARE Flex 155 W, 12 V
plus charge controller MPP 350)

TRAILER

Kuhz boat trailer BTK2700V for Lundi 195:
Box section frame as double frame 6800 x 1790mm
width o.a. 2400mm
length ü.a. 8400mm by extendable light bar
Axle unit adjustable in longitudinal direction
payload 2200kg
16pin plug
2 pieces crank supports with long supports 700x110mm
4 pieces double pendulum rollers with rubber wheels 115mm
5 pieces V-keel rollers 200mm made of PU from Stoltz
3 pieces V-keel rollers (Stoltz) 200mm as drive-on rocker on rear crossbeam
tire size 185/R14
Winch stand with bow buffer and winch
Support wheel
COC acceptance documents... texto completo » menos texto