Cosca 23 Gemini (barco a motor) - Venda

3rd owner since 1998; work carried out in 2006 directly from the production site: carried out a so-called lamellar type jacket of the living work with a treatment of 3 Microns of epoxy paint only on the outer side of the hull (from bottazzo to bottazzo), this to give greater elasticity to the structure and allow adequate transpiration of the hull inside, The work involved a dehumidification from the inside with adequate headlights lasting about 3 4 weeks, after dismantling of all existing structures including engine landing, Replacement of the entire deck with a new solid Teak of about 12mm.con shaped foot in teak stern-bow, Restoration of the original windshield (mahogany) vitrification of the paint in the oven with rearrangement of the sealing frames and replacement of the panels with new polycarbonate, Housing and modifications to the 250 lt stainless steel tank with the creation of an inspection hatch and the addition of an electronic float, Modification of the original stern panel with a new reinforced mahogany for the assembly of a new Mercruiser 4.3 engine from 220 hp. Gasoline, Realization of the dunnage of the entire aft cockpit guide with a new one in Teak after mounting new beams and rearrangement of the ordinates according to new needs due to to the embarkation nozzles for petrol and water tanks, Construction from scratch of the aft body of the engine compartment and side bulkheads with hydraulic compass opening of the covering plane, ********** Rearrangement of the mahogany interior with retractable electric toilet housing under mahogany bulkheads, berth and side accommodation compartments, Modification in the bow with mounting double control electric winch and teak drum for the anchor compartment, Disassembly – reassembly of all the original moldings in chrome-plated brass (air intakes, bollards, battalion etc etc) after chrome bath, assembly ex new of all the aluminum-rubber bottazzo; Changes to the stern platform with replacement of the wooden slats with a new teak carabottino top and changes to the ladder, Renovation of all the internal external upholstery with replacement of the armchairs with new leather goods in sky marine type of the driver's and passenger side armchairs, including stern cushion, sky covers of the instruments, Realization from scratch of stern-bow cover tent summer winter, double awning and more chenille coatings external cushions, 2-way external stereo system with marine type speakers, ex new assembly of 2 lateral stability flaps hydraulically controlled; 2022 : Varta and put new raisers and exhaust manifolds ; Buyer charge commission 5%+VAT

Electronic tools for navigation:
VHF Radio (Midland).

Staging and technical:
Fume/Gas Detector, Engine Alarm, Bilge Alarm, Water pressure pump, 2 Batteries, Teak Side Decks, Deck Shower, Electric Flaps, 2 Automatic Bilge Pump, Teak Cockpit, Electric Windlass.

Domestic Facilities onboard:
Electric Toilet.

Security equipment:
Safety equipment within 3 miles.

Entertainment:
Speakers, Hi-Fi.

Upholstery:
Hull Cover, Cushions, Cockpit Cushions, Sunshade.... texto completo » menos texto