Amel 54 Ketch (barco à vela) - Venda

Stunning 2007 AMEL 54 Ketch. First-hand, UK pavilion in company. Excluding taxes. Luxury owner version. Fully equipped and in excellent condition. Robust, comfortable, and easy to handle. Ready to go.
Justified price.

Building robust, comfortable, and easy-to-handle sailboats was Henri Amel's motto. Offering sailing enthusiasts the opportunity for an adventure on all the world's seas requires impeccable construction in terms of quality, safety, and comfort. We have successfully developed these fundamental AMELs in our latest 50 and 60-foot models. Our shipyard, characterized by attention to detail and 100% French know-how, has been guaranteeing our customers a perfect finish for 50 years. Thus, the AMEL shipyards achieve the perfect synthesis between robustness and maneuverability, indispensable for long-distance navigation, and the luxury of a French lifestyle. The course of the AMEL shipyards is perfectly defined in our baseline "together", each sailboat built brings together the best of our skills to offer our customers unique pleasure.

Layouts:

6 to 11 Sleeps - 3 double cabins

° First U-shaped square on the port side

° Starboard aft chart table

° Engine room

° Large owner's cabin with adjoining bathroom

° U-shaped kitchen in the center of the port side

° Second U-shaped square in the center of the starboard

° Double cabin with bunk beds forward starboard with adjoining bathroom

° Double cabin with double bed and single bunk bed forward port and adjoining bathroom

Engine

VOLVO D3 110 HP 5-cylinder engine, common rail high pressure

Hurth HSW hydraulic inverter (250 hours)

Double RACOR diesel prefilters

REVERSO FPS-80.24v fuel polishing system capacity 300 L/h

Brunton Autoprop folding propeller

900 L diesel tank

Ketch rigging

Masts, booms, all shrouds, and all electrical cables and LEDs refurbished in 2018

Removable stainless steel bowsprit with reinforced under-bar and anchor

4 Lewmar and Harken aluminum winch handles

100 meter Dyneema 14mm coil for backup shrouding

Genoa - Staysail - Mainsail - Mizzen in Hydranett by Incidence Sails

Incidence 100 m2 reinforced stormlite gennaker (on Facnor titanium furler)

Incidence Sails 132 m2 Code 4 (on Facnor titanium/carbon furler)

150m2 Gateff asymmetric spinnaker with sock

2 Facnor titanium carbon furlers

2 Spinnaker halyards in position with dedicated winches

80m2 twin staysail ballooner

1 Ballooner halyard (hoist, hook, unhook)

Electric genoa furler Reckmann with adaptation of the Amel 3-groove aluminum profile

Electric staysail furler Bamar

Internal barber hauler for staysail/genoa centering for close hauling at 34°AWA instead of 39°AWA

Mizzen ballooner on sock

2 Mizzen halyards (ballooner and load halyard)

Double reinforced spinnaker poles, full equipment for downwind sailing in "twin staysails" with multiple genoa/gennaker/code4 combinations

Complete rigging kit with needle threading and accessories for technical braids and ropes

Manual sail repair stitcher

Large dyneema spectra Lancelin sheet (resists x3 compared to origin and 2 mm less in diameter for better winch passage)

Genoa sheets in Lancelin dyneema spectra (resists x3 compared to original and 2 mm less in diameter for better winch operation)

Staysail sheets in Lancelin dyneema spectra (resists x3 compared to original and 2 mm less in diameter for better winch operation)

Main spinnaker halyard in Lancelin dyneema spectra (resists x3 compared to original and 2 mm less in diameter for better winch operation)

Gennaker sheet

Code 4 sheet

2 Ordinary gennaker or Code 4 or ballooner front sheets

2 Continuous spliced sheet ends for furlers for close cockpit manoeuvring, return on friction ring and tension holding shock cords

Complete rigging kit with needles for braiding, dyneema scissors, storm lighters, thimbles, splicing tools, etc.

Anchoring

Main anchor: original stainless steel Wasi anchor + 100m of stainless steel chain - cockpit control with chain counter and deck switches

Secondary anchoring on 2nd windlass: stainless steel Delta anchor + 20m stainless steel chain + 50m polyester cable

Additional anchoring: rear FOB light aluminium anchor 9 kg + 20 m stainless steel chain

Fortress dismountable backup anchor

50 m cossé cable

Main anchorage sea water rinse pump controlled from the cockpit

100m floating cable reel load 1.5T, on plug-in support in fishing rod holder for rear anchor or shore mooring

Additional 100m floating cable reel for difficult shore moorings

3 Iron hands on cable to flexibly fix the anchor chain once moored

1 Self-winding Switech buoy

1 Manual buoy for rear anchor

Comfort

Freshwater tank capacity 900 L

1 Dessalator Dessalator duo 220/24V of 160 L/h (works on direct generator or on the inverters)

1 Dessalator Dessalator 220V of 100 L/h (works on direct generator or on the inverters)

Rear shower with hot and cold water mixer

Fresh water pump Jabsco PAR MAX 6 with 2nd connected pump for immediate replacement in case of failure

3 Air conditioners (the central air outlets have been enlarged for better efficiency) - all 3 are reversible for electric heating

WEBASTO 5000 W fuel forced air heating (including towel warmer outlets)

Isotemp 50 L hot water tank (+ larger than original)

Frigoboat fridge under sink

Fridge/freezer under work table

Fridge/freezer under bench

Set of valves for fridge cooling on fresh water tank, reversible sea water

BOSE sound system

Fusion car radio

Car radio sound system in owner's cabin

ENO gimbal stove with 4 burners and oven

Panasonic NN-DF383B combined electric grill and microwave without turntable

2 Tefal induction plates

Dometic dishwasher

Bosch series 6 washing machine

Indesit NIS41V E 4 kg tumble dryer

Electricity

ONAN 11 kW generator (Kubota 4 cyl engine)

Programmable automatic generator management (autostart Philippi)

2 Watt and Sea hydrogenerators working simultaneously, independently with their 2 regulators, removable, on reinforced brackets

6 Solar panels on rear stainless steel arch

2 Magnum Energy MS4124PE networked inverters, working as 1, charging 200 A, converter up to 9 kW

Dual battery cable networks

1 30A Dock charger

Automatic multi-source system, plus bypass and circuit breakers to combine any possibility in case of failure in the energy chain

20 m of main 32A cable for dock supply, special waterproof socket at the rear panel

2 x 20m extensions of 32A for dock supply

All-format socket kit including 2 US model sockets, 400V sockets, multiple 16A socket and adapters to and from European domestic sockets and 20 m extension

Battery box raised for larger capacity

LED lights on spreader bars, GM deck light and mizzenmast, full-day lighting on the deck and sails, at night

Electronics and navigation instruments

1 Furuno Navpilot autopilot with cockpit control and parallel control at the chart table

1 Second independent and complete Furuno Navpilot autopilot with implementation by a simple switch in case of failure of the main one

Furuno NavNet network with swivel screen at the chart table, cockpit screen and owner's rear cabin screen

Furuno Radar, Overlay, ARPA (radar targeting), Navtex, Standard C, 1000m fish finder

"Navigation" PC with Timezero and global map, interfaced Furuno network and B&G data

"Communications" PC with mail management and satellite communications

Both PCs are clones each with their complete licenses, global mapping and communications

HP Deskjet 460 printer in service

New backup HP Deskjet 460 printer

4 Cameras, images on Furuno network and embedded on chart table screen

Traditional Naudet barograph with paper graph

Ultra-precision electronic Naudet barograph (accurate to 1/10th of a millibar)

Forward sounder on B&G network

1000m dual-frequency fish finder DFF 1

AIS EM TRACK transmitter

B&G H5000 CPU

5 B&G H5000 screens in the cockpit

1 9" B&G V9 multi-function screen in the cockpit

1 7" B&G V7 multi-function screen at the chart table

1 B&G screen in owner's rear cabin

1 B&G P9 3D Compass on B&G network

Sonic Speed sensor (surface speed and temp) and NMEA converter

Dedicated converter for instruments

Miniplex data transmitter (USB and Wifi)

Revised waterline, repainted (the original line does not correspond to the waterlines, defects of the SM2000 and A 54)

Fixed Icom IC-M505 VHF at chart table and cockpit repeater

Icom IC-M801E SSB

Inmarsat Broadband

Inmarsat Fleet One

2 Icom IC-M940 portable VHFs (floating, waterproof, with AIS receiver)

2 Icom IC-M71 waterproof portable VHFs

2 Icom IC-M+EURO V portable VHFs

Pactor P4 dragon DR-7800 modem not connected

Security

6 person life raft

Stainless steel holder for survival gear on the balcony

Regulation grab bag

Optional grab bag (GPS, navigation, manual watermaker)

2 Men's TPS survival suits

2 Women's TPS survival suits

4 complete Ergofit life jackets including 2 with automatic AIS beacons

2 Wichard cockpit harness anchoring points

Dyneema sk99 lifeline, inner deck perimeter preventing overboard fall for short harness tethers

4 pocket personal AIS beacons

2 searchlights on battery

1 searchlight on cable

Jon Buoy

2 Life slings

2 Rescue slings

1 Safety ladder (rear transom)

2 grabbable rear cleats

Amel rear swimming ladder... texto completo » menos texto