Aggiungere alla lista dei desideri
Togliere una barca dalle preferite
14
Would you like to have your watchlist on all your devices? Log in or register for free.
300
Nella lista dei preferiti è possibile salvare solo 300 annunci. Per salvare altri annunci, è necessario prima rimuovere alcuni annunci dalla lista dei preferiti.
boatDetail
boatDetail
0
bid=s319566
bid=s319566
s319566
5
Bénéteau Oceanis 523 Clipper (barca a vela) - vendita
barca a vela / sloop, yacht a vela, barca usataImmagini
1 / 27
▶
▶
immagini
stampa
condividi
Descrizione +
Remarks :
This 2005 Beneteau Oceanis Clipper 523 is a well-regarded performance cruiser built by Chantiers Beneteau in France and finished with twin helm positions and a fin keel. She has been under her current owner for the past eighteen years, based throughout at the same berth in Marmaris, Turkey, and is offered for sale in very good overall condition.
She has been consistently maintained, with teak decks renewed in 2016 using certified Burmese Myanmar teak, the hull repainted in AWLgrip Flag Blue in 2019, and standing and running rigging replaced in 2019 with a rig check carried out in 2022. A significant programme of works has been completed over the past two years, including replacement fuel injectors, a generator heat exchanger, updated Raymarine navigation equipment, refinished saloon flooring, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling, in June 2026.
Highlights Listed below but included in Full Specs:
One owner for the past eighteen years
UK Part 1 Registration
Teak decks renewed (2016) — certified Burmese Myanmar teak
Hull repainted in Awlgrip Flag Blue (2019)
Standing and running rigging renewed (2019); rig check (2022)
North Sails wardrobe, removed and fully serviced each winter
Yanmar 4JH3HTE 100hp diesel — fuel injectors replaced (2025)
Onan 9.6kVA generator — heat exchanger replaced (2025)
Separate crew cabin at the bow with its own entrance, heads, and shower
Vitrifrigo compressor refrigeration (2020);
Cruisair air conditioning throughout, serviced (June 2026)
Engine, generator, air conditioning, and windlass serviced; antifouled (June 2026)
Prop bearings and anodes renewed (June 2026)
BROKER'S REMARKS
This Oceanis Clipper 523 offers a genuinely reassuring ownership story: one owner for the past eighteen years, a full and continuous set of ownership and registration documents, and a consistent maintenance record. Teak decks were renewed in 2016, rigging was replaced in 2019, and a substantial round of servicing and renewal was completed as recently as June 2026 — the hallmark of an owner who has kept on top of the major items rather than deferring them.
The layout is a genuine practical advantage at this length: three cabins and three heads for owners and guests, plus a separate crew cabin at the bow with its own entrance, heads, and shower, and air conditioning served from the master cabin unit. The North Sails wardrobe, removed and serviced each winter, together with the Sparcraft rig and extensive downwind sail and spinnaker gear, points to a yacht that has been sailed actively and looked after properly.
Offered at a realistic asking price, she represents a sensible and well-documented package for a buyer seeking a capable, well-equipped 53-foot performance cruiser with no significant work outstanding.
CONSTRUCTION
Builder: Beneteau, France
Model: Oceanis Clipper 523
Year: 2005
Hull material: GRP
Deck material: GRP with teak overlay, renewed (2016) — certified Burmese Myanmar teak
Hull colour: Flag Blue, AWL grip painted (2019)
Keel type: Fin
Helm: Twin helm positions
DIMENSIONS
LOA: 15.86m (52ft 0in)
Beam: 4.87m (16ft 0in)
Draft: 2.40m (7ft 10in)
Depth: 2.09m (6ft 10in)
Light displacement: 14,000kg
MECHANICAL
Engine: Yanmar 4JH3HTE, fresh-water cooled diesel inboard
Engine power: 100hp (74.6kW)
Fuel injectors: Replaced (2025)
Drive type: Shaft drive
Propeller: 3-blade, fixed
Prop bearings and anodes: Replaced (June 2026)
Bow thruster: Fitted
PERFORMANCE
Sail area (upwind, standard): 151m²
Cruising speed: Approximately 8 knots
Maximum speed: Approximately 10 knots
TANKAGE
Fuel: 450 litres (99 gallons), 2 tanks
Water: 750 litres (165 gallons), 2 tanks
Holding tank: 3 x 30 litres
Water heating: 42-litre calorifier, heated via engine or 220V shore power
ELECTRICAL
System: 12V DC / 220V AC
Domestic batteries: 4 x 140Ah service bank
Engine start battery: 1 x 140Ah
Bow thruster / windlass battery: 1 x 140Ah — replaced (2022)
Generator battery: 1 x 100Ah
Battery charger: Victron Centaur 12V/80A, replaced (2025)
Generator: Onan 9.6kVA diesel, with cocoon — heat exchanger replaced (2025)
Lighting: LED upgrade throughout
Shore power: 220V
RIGGING
Rig type: Masthead sloop, twin aft swept spreaders
Spars: Sparcraft — mast, boom, and spinnaker poles
Standing rigging: Replaced (2019); rig check carried out (2022)
Running rigging: Renewed (2019)
Furling: Facnor headsail furling (2019); Bamar Rollgen furling gear for cruising chute with spliced endless line
Reefing: Slab reefing main, three reefs, lines led aft to cockpit; lazybag fitted
Spinnaker gear: Asymmetric spinnaker gear with two anodised spinnaker poles; inner forestay deck attachment point; stainless steel bowsprit
Additional rigging equipment: twin spinnaker halyards and pole topping lifts (racing Dyneema); second genoa halyard and mouse for wing genoa; spinnaker pole piston, cars and track; pole heel lift system with cam cleats and carbon blocks; twin double Spinlock clutches; pole downhaul system; insulated backstays with grounding plate; jackstays fitted
SAILS
Mainsail: North Sails, battened, slab reefing (3 reefs)
Genoa: North Sails, furling
Crosscut running headsail: North Sails, with bag and ties
Asymmetric gennaker: Fitted
Sail wardrobe removed from the vessel and fully serviced, including washing, each winter
NAVIGATION
Chartplotters: 2 x Raymarine E80 (helm and navigation station)
GPS antenna: Raymarine RS115, with adapter — fitted (2025)
Autopilot: Raymarine ST6001+
Multi-function display: Raymarine ST60
Tridata: Raymarine ST69
Wind instruments: Raymarine ST60
Radar: Raymarine
VHF radio: Fixed, with DSC; 2 x handheld
SSB radio: Fitted, with modem and hardware
PC interface: Raymarine, fitted
DECK
Winches: 2 x electric genoa winches (H66 2STCEH/66.2STC); 1 x electric winch, port (44.2 STCEH); 1 x manual winch, starboard (44.2 STC)
Windlass: Lewmar electric, with control at bow and remote at helm station — serviced (June 2026)
Anchor: Main anchor with 80m x 10mm chain
Passerelle: Fitted
Swim ladder: Fitted
Cockpit table: Wooden
Cockpit shower: Hot and cold, on bathing platform
SAFETY
Life rafts: 2 x fitted
EPIRB: 406MHz
Life jackets: 6
Life lines: 6
Dan buoy: Fitted
Handheld VHF radios: 2
Fire extinguishers: 4
Fire blanket: Fitted, located adjacent to the oven
ACCOMMODATION
This Oceanis Clipper 523 offers comfortable six-berth accommodation across three cabins, including two aft cabins, together with a separate crew cabin at the bow with its own entrance. Three heads compartments are fitted, each with toilet, handbasin, and shower — including the crew cabin, which also benefits from air conditioning served from the master cabin unit. The interior is finished in cherry with cream leather upholstery, and headroom is approximately 2m throughout.
LAYOUT
The layout comprises three cabins with berths for six, including two aft cabins, a central saloon with a wraparound settee and dining table, and a separate crew cabin at the bow accessed by its own entrance — a practical arrangement for additional crew or guest privacy. Three heads compartments serve the accommodation, each fitted with toilet, handbasin, and shower.
DOMESTIC
The galley is equipped with a four-burner gas cooker and oven, a microwave (serviced 2025), two Vitrifrigo C130L compressor refrigerators (replaced 2020), and a stainless-steel double sink with pressurised hot and cold water. Hot water is supplied via a 42-litre calorifier from the engine or 220V shore power. Three Cruisair air conditioning units serve the accommodation, serviced in June 2026. Entertainment includes a 17-inch television with combination DVD player in the saloon, a 12V TV antenna, and a radio/CD player with speakers in the saloon and cockpit.
CANVAS
Sprayhood: Replaced (2020)
Bimini: Replaced (2020)
Luff bag Genoa cover: Fitted
All-over winter cover: Fitted
Boom cover: Fitted
Wheel covers: Fitted
TENDER
Dinghy: Seago 2.70m hypalon inflatable (2020)
Outboard: Yamaha 4hp, four-stroke
MISCELLANEOUS
Main saloon floor refinished — sanded and revarnished (December 2024)
Cutlery, crockery, and utensils
EXTRA DETAILS
Currently berthed in Marmaris, Turkey
Full ownership and registration documentation available, tracing provenance from first supply in 2005
TITLE DOCUMENTS AND TAX
Listed below are the documents/or copies which we have seen on listing this yacht.
UK Part 1 Registration — current
Builder's Certificate — seen
RYA Certificate of Tonnage — seen
Documented chain of title from first supply in 2005 to the current ownership
VAT is not paid as originally exported.
KNOWN DEFECTS
NONE
HISTORY
This Oceanis Clipper 523 was built by Chantiers Beneteau in Saint-Hilaire-de-Riez, France, and first sold new in September 2005. She has been under her current private ownership since January 2008, based throughout at the same berth in Marmaris, Turkey — eighteen years of continuous ownership. A marine mortgage previously registered against the vessel was formally discharged in February 2016.
Under the current ownership, the teak decks were renewed in 2016 with certified Burmese Myanmar teak, and the hull was repainted in Awl grip Flag Blue in 2019, the same year the standing and running rigging were replaced; a rig check followed in 2022. More recently, the vessel has benefited from a battery charger replacement and refreshed service, engine, and bow thruster batteries (2022), Vitrifrigo refrigeration (2020), and a replaced sprayhood and Bimini (2020). Works carried out in the past year include replacement fuel injectors for the engine, a generator heat exchanger replacement, updated Raymarine GPS equipment, refinishing of the saloon sole, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling and renewal of the prop bearings and anodes, completed in June 2026. The sail wardrobe is removed and fully serviced each winter. Further details of ownership and maintenance history are available on request.
Accommodation :
ACCOMMODATION
This Oceanis Clipper 523 offers comfortable six-berth accommodation across three cabins, including two aft cabins, together with a separate crew cabin at the bow with its own entrance. Three heads compartments are fitted, each with toilet, handbasin, and shower — including the crew cabin, which also benefits from air conditioning served from the master cabin unit. The interior is finished in cherry with cream leather upholstery, and headroom is approximately 2m throughout.
LAYOUT
The layout comprises three cabins with berths for six, including two aft cabins, a central saloon with a wraparound settee and dining table, and a separate crew cabin at the bow accessed by its own entrance — a practical arrangement for additional crew or guest privacy. Three heads compartments serve the accommodation, each fitted with toilet, handbasin, and shower.
DOMESTIC
The galley is equipped with a four-burner gas cooker and oven, a microwave (serviced 2025), two Vitrifrigo C130L compressor refrigerators (replaced 2020), and a stainless-steel double sink with pressurised hot and cold water. Hot water is supplied via a 42-litre calorifier from the engine or 220V shore power. Three Cruisair air conditioning units serve the accommodation, serviced in June 2026. Entertainment includes a 17-inch television with combination DVD player in the saloon, a 12V TV antenna, and a radio/CD player with speakers in the saloon and cockpit.
Inventory :
NAVIGATION
Chartplotters: 2 x Raymarine E80 (helm and navigation station)
GPS antenna: Raymarine RS115, with adapter — fitted (2025)
Autopilot: Raymarine ST6001+
Multi-function display: Raymarine ST60
Tridata: Raymarine ST69
Wind instruments: Raymarine ST60
Radar: Raymarine
VHF radio: Fixed, with DSC; 2 x handheld
SSB radio: Fitted, with modem and hardware
PC interface: Raymarine, fitted
DECK
Winches: 2 x electric genoa winches (H66 2STCEH/66.2STC); 1 x electric winch, port (44.2 STCEH); 1 x manual winch, starboard (44.2 STC)
Windlass: Lewmar electric, with control at bow and remote at helm station — serviced (June 2026)
Anchor: Main anchor with 80m x 10mm chain
Passerelle: Fitted
Swim ladder: Fitted
Cockpit table: Wooden
Cockpit shower: Hot and cold, on bathing platform
CANVAS
Sprayhood: Replaced (2020)
Bimini: Replaced (2020)
Luff bag Genoa cover
All-over winter cover
Boom cover
Wheel covers
TENDER
Dinghy: Seago 2.70m hypalon inflatable (2020)
Outboard: Yamaha 4hp, four-stroke
MISCELLANEOUS
Main saloon floor refinished — sanded and revarnished (December 2024)
Cutlery, crockery, and utensils
EXTRA DETAILS
Currently berthed in Leros, Greece
Full ownership and registration documentation available, tracing provenance from first supply in 2005
TITLE DOCUMENTS AND TAX
Listed below are the documents/or copies which we have seen on listing this yacht.
UK Part 1 Registration
Builder's Certificate
RYA Certificate of Tonnage
Documented chain of title from first supply in 2005 to the current ownership
VAT is not paid as originally exported.
KNOWN DEFECTS
NONE
HISTORY
This Oceanis Clipper 523 was built by Chantiers Beneteau in Saint-Hilaire-de-Riez, France, and first sold new in September 2005. She has been under her current private ownership since January 2008, based throughout at the same berth in Marmaris, Turkey — eighteen years of continuous ownership. A marine mortgage previously registered against the vessel was formally discharged in February 2016.
Under the current ownership, the teak decks were renewed in 2016 with certified Burmese Myanmar teak, and the hull was repainted in Awl grip Flag Blue in 2019, the same year the standing and running rigging were replaced; a rig check followed in 2022. More recently, the vessel has benefited from a battery charger replacement and refreshed service, engine, and bow thruster batteries (2022), Vitrifrigo refrigeration (2020), and a replaced sprayhood and Bimini (2020). Works carried out in the past year include replacement fuel injectors for the engine, a generator heat exchanger replacement, updated Raymarine GPS equipment, refinishing of the saloon sole, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling and renewal of the prop bearings and anodes, completed in June 2026. The sail wardrobe is removed and fully serviced each winter.
Mechanical :
CONSTRUCTION
Builder: Beneteau, France
Model: Oceanis Clipper 523
Year: 2005
Hull material: GRP
Deck material: GRP with teak overlay,... testo completo
This 2005 Beneteau Oceanis Clipper 523 is a well-regarded performance cruiser built by Chantiers Beneteau in France and finished with twin helm positions and a fin keel. She has been under her current owner for the past eighteen years, based throughout at the same berth in Marmaris, Turkey, and is offered for sale in very good overall condition.
She has been consistently maintained, with teak decks renewed in 2016 using certified Burmese Myanmar teak, the hull repainted in AWLgrip Flag Blue in 2019, and standing and running rigging replaced in 2019 with a rig check carried out in 2022. A significant programme of works has been completed over the past two years, including replacement fuel injectors, a generator heat exchanger, updated Raymarine navigation equipment, refinished saloon flooring, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling, in June 2026.
Highlights Listed below but included in Full Specs:
One owner for the past eighteen years
UK Part 1 Registration
Teak decks renewed (2016) — certified Burmese Myanmar teak
Hull repainted in Awlgrip Flag Blue (2019)
Standing and running rigging renewed (2019); rig check (2022)
North Sails wardrobe, removed and fully serviced each winter
Yanmar 4JH3HTE 100hp diesel — fuel injectors replaced (2025)
Onan 9.6kVA generator — heat exchanger replaced (2025)
Separate crew cabin at the bow with its own entrance, heads, and shower
Vitrifrigo compressor refrigeration (2020);
Cruisair air conditioning throughout, serviced (June 2026)
Engine, generator, air conditioning, and windlass serviced; antifouled (June 2026)
Prop bearings and anodes renewed (June 2026)
BROKER'S REMARKS
This Oceanis Clipper 523 offers a genuinely reassuring ownership story: one owner for the past eighteen years, a full and continuous set of ownership and registration documents, and a consistent maintenance record. Teak decks were renewed in 2016, rigging was replaced in 2019, and a substantial round of servicing and renewal was completed as recently as June 2026 — the hallmark of an owner who has kept on top of the major items rather than deferring them.
The layout is a genuine practical advantage at this length: three cabins and three heads for owners and guests, plus a separate crew cabin at the bow with its own entrance, heads, and shower, and air conditioning served from the master cabin unit. The North Sails wardrobe, removed and serviced each winter, together with the Sparcraft rig and extensive downwind sail and spinnaker gear, points to a yacht that has been sailed actively and looked after properly.
Offered at a realistic asking price, she represents a sensible and well-documented package for a buyer seeking a capable, well-equipped 53-foot performance cruiser with no significant work outstanding.
CONSTRUCTION
Builder: Beneteau, France
Model: Oceanis Clipper 523
Year: 2005
Hull material: GRP
Deck material: GRP with teak overlay, renewed (2016) — certified Burmese Myanmar teak
Hull colour: Flag Blue, AWL grip painted (2019)
Keel type: Fin
Helm: Twin helm positions
DIMENSIONS
LOA: 15.86m (52ft 0in)
Beam: 4.87m (16ft 0in)
Draft: 2.40m (7ft 10in)
Depth: 2.09m (6ft 10in)
Light displacement: 14,000kg
MECHANICAL
Engine: Yanmar 4JH3HTE, fresh-water cooled diesel inboard
Engine power: 100hp (74.6kW)
Fuel injectors: Replaced (2025)
Drive type: Shaft drive
Propeller: 3-blade, fixed
Prop bearings and anodes: Replaced (June 2026)
Bow thruster: Fitted
PERFORMANCE
Sail area (upwind, standard): 151m²
Cruising speed: Approximately 8 knots
Maximum speed: Approximately 10 knots
TANKAGE
Fuel: 450 litres (99 gallons), 2 tanks
Water: 750 litres (165 gallons), 2 tanks
Holding tank: 3 x 30 litres
Water heating: 42-litre calorifier, heated via engine or 220V shore power
ELECTRICAL
System: 12V DC / 220V AC
Domestic batteries: 4 x 140Ah service bank
Engine start battery: 1 x 140Ah
Bow thruster / windlass battery: 1 x 140Ah — replaced (2022)
Generator battery: 1 x 100Ah
Battery charger: Victron Centaur 12V/80A, replaced (2025)
Generator: Onan 9.6kVA diesel, with cocoon — heat exchanger replaced (2025)
Lighting: LED upgrade throughout
Shore power: 220V
RIGGING
Rig type: Masthead sloop, twin aft swept spreaders
Spars: Sparcraft — mast, boom, and spinnaker poles
Standing rigging: Replaced (2019); rig check carried out (2022)
Running rigging: Renewed (2019)
Furling: Facnor headsail furling (2019); Bamar Rollgen furling gear for cruising chute with spliced endless line
Reefing: Slab reefing main, three reefs, lines led aft to cockpit; lazybag fitted
Spinnaker gear: Asymmetric spinnaker gear with two anodised spinnaker poles; inner forestay deck attachment point; stainless steel bowsprit
Additional rigging equipment: twin spinnaker halyards and pole topping lifts (racing Dyneema); second genoa halyard and mouse for wing genoa; spinnaker pole piston, cars and track; pole heel lift system with cam cleats and carbon blocks; twin double Spinlock clutches; pole downhaul system; insulated backstays with grounding plate; jackstays fitted
SAILS
Mainsail: North Sails, battened, slab reefing (3 reefs)
Genoa: North Sails, furling
Crosscut running headsail: North Sails, with bag and ties
Asymmetric gennaker: Fitted
Sail wardrobe removed from the vessel and fully serviced, including washing, each winter
NAVIGATION
Chartplotters: 2 x Raymarine E80 (helm and navigation station)
GPS antenna: Raymarine RS115, with adapter — fitted (2025)
Autopilot: Raymarine ST6001+
Multi-function display: Raymarine ST60
Tridata: Raymarine ST69
Wind instruments: Raymarine ST60
Radar: Raymarine
VHF radio: Fixed, with DSC; 2 x handheld
SSB radio: Fitted, with modem and hardware
PC interface: Raymarine, fitted
DECK
Winches: 2 x electric genoa winches (H66 2STCEH/66.2STC); 1 x electric winch, port (44.2 STCEH); 1 x manual winch, starboard (44.2 STC)
Windlass: Lewmar electric, with control at bow and remote at helm station — serviced (June 2026)
Anchor: Main anchor with 80m x 10mm chain
Passerelle: Fitted
Swim ladder: Fitted
Cockpit table: Wooden
Cockpit shower: Hot and cold, on bathing platform
SAFETY
Life rafts: 2 x fitted
EPIRB: 406MHz
Life jackets: 6
Life lines: 6
Dan buoy: Fitted
Handheld VHF radios: 2
Fire extinguishers: 4
Fire blanket: Fitted, located adjacent to the oven
ACCOMMODATION
This Oceanis Clipper 523 offers comfortable six-berth accommodation across three cabins, including two aft cabins, together with a separate crew cabin at the bow with its own entrance. Three heads compartments are fitted, each with toilet, handbasin, and shower — including the crew cabin, which also benefits from air conditioning served from the master cabin unit. The interior is finished in cherry with cream leather upholstery, and headroom is approximately 2m throughout.
LAYOUT
The layout comprises three cabins with berths for six, including two aft cabins, a central saloon with a wraparound settee and dining table, and a separate crew cabin at the bow accessed by its own entrance — a practical arrangement for additional crew or guest privacy. Three heads compartments serve the accommodation, each fitted with toilet, handbasin, and shower.
DOMESTIC
The galley is equipped with a four-burner gas cooker and oven, a microwave (serviced 2025), two Vitrifrigo C130L compressor refrigerators (replaced 2020), and a stainless-steel double sink with pressurised hot and cold water. Hot water is supplied via a 42-litre calorifier from the engine or 220V shore power. Three Cruisair air conditioning units serve the accommodation, serviced in June 2026. Entertainment includes a 17-inch television with combination DVD player in the saloon, a 12V TV antenna, and a radio/CD player with speakers in the saloon and cockpit.
CANVAS
Sprayhood: Replaced (2020)
Bimini: Replaced (2020)
Luff bag Genoa cover: Fitted
All-over winter cover: Fitted
Boom cover: Fitted
Wheel covers: Fitted
TENDER
Dinghy: Seago 2.70m hypalon inflatable (2020)
Outboard: Yamaha 4hp, four-stroke
MISCELLANEOUS
Main saloon floor refinished — sanded and revarnished (December 2024)
Cutlery, crockery, and utensils
EXTRA DETAILS
Currently berthed in Marmaris, Turkey
Full ownership and registration documentation available, tracing provenance from first supply in 2005
TITLE DOCUMENTS AND TAX
Listed below are the documents/or copies which we have seen on listing this yacht.
UK Part 1 Registration — current
Builder's Certificate — seen
RYA Certificate of Tonnage — seen
Documented chain of title from first supply in 2005 to the current ownership
VAT is not paid as originally exported.
KNOWN DEFECTS
NONE
HISTORY
This Oceanis Clipper 523 was built by Chantiers Beneteau in Saint-Hilaire-de-Riez, France, and first sold new in September 2005. She has been under her current private ownership since January 2008, based throughout at the same berth in Marmaris, Turkey — eighteen years of continuous ownership. A marine mortgage previously registered against the vessel was formally discharged in February 2016.
Under the current ownership, the teak decks were renewed in 2016 with certified Burmese Myanmar teak, and the hull was repainted in Awl grip Flag Blue in 2019, the same year the standing and running rigging were replaced; a rig check followed in 2022. More recently, the vessel has benefited from a battery charger replacement and refreshed service, engine, and bow thruster batteries (2022), Vitrifrigo refrigeration (2020), and a replaced sprayhood and Bimini (2020). Works carried out in the past year include replacement fuel injectors for the engine, a generator heat exchanger replacement, updated Raymarine GPS equipment, refinishing of the saloon sole, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling and renewal of the prop bearings and anodes, completed in June 2026. The sail wardrobe is removed and fully serviced each winter. Further details of ownership and maintenance history are available on request.
Accommodation :
ACCOMMODATION
This Oceanis Clipper 523 offers comfortable six-berth accommodation across three cabins, including two aft cabins, together with a separate crew cabin at the bow with its own entrance. Three heads compartments are fitted, each with toilet, handbasin, and shower — including the crew cabin, which also benefits from air conditioning served from the master cabin unit. The interior is finished in cherry with cream leather upholstery, and headroom is approximately 2m throughout.
LAYOUT
The layout comprises three cabins with berths for six, including two aft cabins, a central saloon with a wraparound settee and dining table, and a separate crew cabin at the bow accessed by its own entrance — a practical arrangement for additional crew or guest privacy. Three heads compartments serve the accommodation, each fitted with toilet, handbasin, and shower.
DOMESTIC
The galley is equipped with a four-burner gas cooker and oven, a microwave (serviced 2025), two Vitrifrigo C130L compressor refrigerators (replaced 2020), and a stainless-steel double sink with pressurised hot and cold water. Hot water is supplied via a 42-litre calorifier from the engine or 220V shore power. Three Cruisair air conditioning units serve the accommodation, serviced in June 2026. Entertainment includes a 17-inch television with combination DVD player in the saloon, a 12V TV antenna, and a radio/CD player with speakers in the saloon and cockpit.
Inventory :
NAVIGATION
Chartplotters: 2 x Raymarine E80 (helm and navigation station)
GPS antenna: Raymarine RS115, with adapter — fitted (2025)
Autopilot: Raymarine ST6001+
Multi-function display: Raymarine ST60
Tridata: Raymarine ST69
Wind instruments: Raymarine ST60
Radar: Raymarine
VHF radio: Fixed, with DSC; 2 x handheld
SSB radio: Fitted, with modem and hardware
PC interface: Raymarine, fitted
DECK
Winches: 2 x electric genoa winches (H66 2STCEH/66.2STC); 1 x electric winch, port (44.2 STCEH); 1 x manual winch, starboard (44.2 STC)
Windlass: Lewmar electric, with control at bow and remote at helm station — serviced (June 2026)
Anchor: Main anchor with 80m x 10mm chain
Passerelle: Fitted
Swim ladder: Fitted
Cockpit table: Wooden
Cockpit shower: Hot and cold, on bathing platform
CANVAS
Sprayhood: Replaced (2020)
Bimini: Replaced (2020)
Luff bag Genoa cover
All-over winter cover
Boom cover
Wheel covers
TENDER
Dinghy: Seago 2.70m hypalon inflatable (2020)
Outboard: Yamaha 4hp, four-stroke
MISCELLANEOUS
Main saloon floor refinished — sanded and revarnished (December 2024)
Cutlery, crockery, and utensils
EXTRA DETAILS
Currently berthed in Leros, Greece
Full ownership and registration documentation available, tracing provenance from first supply in 2005
TITLE DOCUMENTS AND TAX
Listed below are the documents/or copies which we have seen on listing this yacht.
UK Part 1 Registration
Builder's Certificate
RYA Certificate of Tonnage
Documented chain of title from first supply in 2005 to the current ownership
VAT is not paid as originally exported.
KNOWN DEFECTS
NONE
HISTORY
This Oceanis Clipper 523 was built by Chantiers Beneteau in Saint-Hilaire-de-Riez, France, and first sold new in September 2005. She has been under her current private ownership since January 2008, based throughout at the same berth in Marmaris, Turkey — eighteen years of continuous ownership. A marine mortgage previously registered against the vessel was formally discharged in February 2016.
Under the current ownership, the teak decks were renewed in 2016 with certified Burmese Myanmar teak, and the hull was repainted in Awl grip Flag Blue in 2019, the same year the standing and running rigging were replaced; a rig check followed in 2022. More recently, the vessel has benefited from a battery charger replacement and refreshed service, engine, and bow thruster batteries (2022), Vitrifrigo refrigeration (2020), and a replaced sprayhood and Bimini (2020). Works carried out in the past year include replacement fuel injectors for the engine, a generator heat exchanger replacement, updated Raymarine GPS equipment, refinishing of the saloon sole, and a full service of the engine, generator, air conditioning, and windlass, together with fresh antifouling and renewal of the prop bearings and anodes, completed in June 2026. The sail wardrobe is removed and fully serviced each winter.
Mechanical :
CONSTRUCTION
Builder: Beneteau, France
Model: Oceanis Clipper 523
Year: 2005
Hull material: GRP
Deck material: GRP with teak overlay,... testo completo
chiudere la selezione
Dati della barca +
Dati della barca Bénéteau Oceanis 523 Clipper
Prezzo:
€ 159.000
IVA esclusa
ID barca:
s319566
Modello di barca:
Bénéteau Oceanis 523 Clipper
Produttore:
Tipo di barca:
barca a vela
Categoria di barca:
sloop, yacht a vela
Categoria:
barca usata
Anno di costruzione:
2005
Posto d’ormeggio:
Grecia, Marmaris
Materiale dello scafo:
vetroresina
Dettagli tecnici
Lunghezza:
16,46 m (54 piedi)
Larghezza:
4,88 m
Motore:
Yanmar 4JH3HTE
Potenza del motore:
100 cv (74 kW)
Carburante:
diesel
chiudere la selezione
Pubblicità / servizio
Attrezzatura+
Attrezzatura - Bénéteau Oceanis 523 Clipper - sloop / barca a vela in vendita
Navigazioneautopilota, GPS, plotter, radar, vhf
Equipaggiamento tecnico
attacco corrente 220v a terra, caricabatterie, condizionatore, elica di prua, generatore
Sicurezza
EPIRB, giubbotto di salvataggio, zattera di salvataggio
Dotazioni di coperta
bimini top, piattaforma da bagno, ponte in teak, sprayhood
Dotazioni degli interni
lavandino, microonde
Intrattenimento
dvd, lettore cd, tv
Vele
gennaker, spinnaker
Altre dotazioni
antivegetativa, tavolo da pozzetto
chiudere la selezione
Contatto-
Bénéteau Oceanis 523 Clipper - ottenere informazioni del venditore senza impegno
pf-21790
La preghiamo di comunicare al venditore che ha trovato questa offerta su Yachtall.
Contatto:
Band of Boats
Network Yacht Brokers Lefkas
Cleopatra Marina (Dock side) Atkio-Preveza
48100 IONIAN ISLANDS
Grecia
Telefono:
mostrare
Lingue:
greco, inglese, francese
Da 7 anni su yachtall.comchiudere la selezione
Comprare una barca:
Beneteau Oceanis Beneteau Oceanis 523 Bénéteau barche sloop barche a vela in vendita barche a vela Grecia barche usate barche usate Bénéteau
Beneteau Oceanis Beneteau Oceanis 523 Bénéteau barche sloop barche a vela in vendita barche a vela Grecia barche usate barche usate Bénéteau
Altre barche (come p.e. un(o) Bénéteau Oceanis 523 Clipper) - compra e vendita
Bénéteau 50
Barca a vela / sloop: Bénéteau, barca usataLunghezza x larghezza: 15,48 m x 4,48 m, 15,48 x 4,48 m anno: 2003, cabine: 3
Motore: 100 cv (74 kW), diesel
€ 135.000
Posto d’ormeggio: Spagna, Vigo
2003
Azienda: Band of Boats
Prezzo: € 135.000, IVA inclusa
Bénéteau Oceanis 54
Barca a vela / sloop: Bénéteau, barca usata, vetroresinaLunghezza x larghezza: 16,70 m x 4,90 m, 16,70 x 4,90 m anno: 2010, cabine: 3
Motore: Yanmar, 110 cv (81 kW), diesel
€ 240.000
Posto d’ormeggio: Francia, Port Camargue
2010
Azienda: Band of Boats
Prezzo: € 240.000, IVA esclusa
Bénéteau 57
Barca a vela / sloop: Bénéteau, barca usata, vetroresinaLunghezza x larghezza: 17,20 m x 4,93 m, 17,20 x 4,93 m anno: 2006, cabine: 4
Motore: Yanmar 4LHA-HTP, 160 cv (118 kW), diesel
€ 399.000
Posto d’ormeggio: Portogallo
2006
Azienda: Band of Boats
Prezzo: € 399.000, IVA esclusa
Bénéteau Oceanis 54
Barca a vela / sloop: Bénéteau, barca usata, vetroresinaLunghezza x larghezza: 16,26 m x 4,90 m, 16,26 x 4,90 m anno: 2011, cabine: 3
Motore: Yanmar Engine, 110 cv (81 kW)
€ 270.000
Posto d’ormeggio: Malta
2011
Azienda: Band of Boats
Prezzo: € 270.000, IVA inclusa
Questi(e) barche a vela Le potrebbero piacere
Bénéteau Sense 55 (16,80 m) Bénéteau Oceanis 523 (16,20 m) Bénéteau Oceanis 51.1 (15,94 m) Bénéteau 57 (17,60 m) Bénéteau Oceanis 54 Owners Basis for Negotiation (17,12 m) Bénéteau Cyclades 50.5 (15,65 m) Bénéteau Oceanis 54 (16,26 m) Bénéteau Cyclades 50.5 (15,70 m) Bénéteau Cyclades 50.5 (15,62 m) Bénéteau Oceanis 52 (16,28 m) Bénéteau Oceanis 51.1 (15,94 m) Bénéteau Oceanis 51.1 (15,94 m)
Quale versione vorrebbe visualizzare?
Inviare una richiesta
Bénéteau Oceanis 523 Clipper, anno 2005
Contatto:
Band of Boats
