www.yachtall.com/pt/barco/koopmans-31-s209728
data de impressão: 16.05.2024 05:15:19
data de impressão: 16.05.2024 05:15:19
Koopmans 31
€ 25.500
IVA incl., Tributado pela EU
ID do barco:
s209728
Modelo de barco:
Koopmans 31
Nome do barco:
Gonzesse
Fabricante:
Koopmans
Designer:
Koopmans, D.
Tipo de barco:
barco à vela
Categoria:
barco usado
Ano de construção:
1984
Localização:
Países Baixos, Hemelum
Cor do casco:
cinzento
Tanque de água doce:
70 ltr
Depósito de combustível:
50 ltr
Direção:
cana de leme
Lastro:
1.600 kg
Comprimento:
9,50 m (31,2 pés)
Largura / calado:
2,90 / 1,60 m
Altura interior:
1,90 m
Peso:
ca. 4.000 kg
Quantidade de WCs:
1
Aquecimento:
sim
Motor:
Status Marine
Potência do motor:
20 CV (15 kW)
Combustível:
gasóleo
Propulsão:
veio
Dit schip is door een prive persoon met veel liefde en kennis gebouwd, en is van werfkwaliteit!
I.o.v. Koopmans is bij dit schip een verlengde kajuit toegepast.
Eventueel is leveren met ligplaats in Warns mogelijk.
Equipamento
estai de tempestades (De Vries 7m2, High Aspect 23 m2 Aad Kool), genoa (De Vries, 32 m2), spinnaker (De Vries 75 m2), vela grande (Aad Kool, 17.3 m2), capuchana, convés em teca, escada de banho, varandim, âncora (Tenford), bateria (55 Ah), carregador das baterias (Victron blue smart IP 22 charger), ligação 220 V, anemómetro (Raymarine ST 60), bússola (Contest, new), GPS (Furuno), sonda (Raymarine ST 60), velocidade (Sea Data), VHF (UNIDEN), fogão a álcool (2 pits)
Informação suplementar
Built from 1st quality plywood 3x5 mm in 3 layers cross glued with Resorsinol glue.The hull is reinforced on the inside with stringers, (see photo, last for the engine)
The deck is made of 2x5 mm with the teak deck slats glued on it.Furniture,walls,bulkheads doors etc, are of mahogany plywood, finished with solid mahogany.
The floors are varnished plywood, inlaid with wenge strips. The ship is partly built and preserved in Epoxy, including the exterior of the underwater ship.
Hoses at engine replaced in 2020.
Informação suplementar
Built from 1st quality plywood 3x5 mm in 3 layers cross glued with Resorsinol glue.The hull is reinforced on the inside with stringers, (see photo, last for the engine)
The deck is made of 2x5 mm with the teak deck slats glued on it.Furniture,walls,bulkheads doors etc, are of mahogany plywood, finished with solid mahogany.
The floors are varnished plywood, inlaid with wenge strips. The ship is partly built and preserved in Epoxy, including the exterior of the underwater ship.
Hoses at engine replaced in 2020.
Fornecedor:
Scheepsmakelaardij Goliath BV.
Scheepsmakelaardij Goliath Lemmer 1
Senhor Scheepsmakelaardij Goliath
Kadijk 7
8531 XD Lemmer
Países Baixos
Telemóvel:
+31 6 53 61 36 35
Idiomas:
alemão, inglês, croata, holandês, russo
www.scheepsmakelaardijgoliath.nl