Gebr. Schurenstedt Motor Yacht Gaia

www.yachtall.com/pt/barco/gebr.-schurenstedt-motor-yacht-gaia-s240011
data de impressão: 19.05.2024 11:17:06

€ 750.000

IVA incl.

ID do barco:

s240011

Modelo de barco:

Gebr. Schurenstedt Motor Yacht Gaia

Fabricante:

Gebr. Schurenstedt

Designer:

Arch. Alessio Liuni

Tipo de barco:

barco a motor / iate a motor

Categoria:

barco clássico

Ano de construção:

1956

Estado de conservação:

como novo

Localização:

Itália, Mare Adriatico

Bandeira:

Áustria

Material do casco:

barco de aço

Tipo de casco:

deslocamento

Tanque de água doce:

1.500 ltr

Depósito de combustível:

24.000 ltr

Tanque de águas fecais:

1.000 ltr

Comprimento:

24,75 m (81 pés)

Largura / calado:

4,85 / 2,05 m

Peso:

ca. 80.000 kg

Pessoas:

Cabines / beliches:

4 / 8

Quantidade de WCs:

Aquecimento:

sim

Motor:

Cummins 6 CTA 8,3

Potência do motor:

255 CV (188 kW)

Combustível:

gasóleo

Propulsão:

veio

Horas do motor:

ca. 1.400

Velocidade de cruzeiro:

9 kn

Velocidade máx.:

12 kn

Outro:

flybridge

MOTOR YACHT GAIA has a history of great charm and interest behind it:
is a displacement shuttle built in the late 1950s at the German shipyard Schurenstedt. Originally named Kormoran built for a German shipowner as a pleasure M/Y, later sold to an Italian shipowner and transferred to the Mediterranean.
Over the years, it was acquired again by a Sicilian shipowner who, at the Rodriguez shipyard with the naval architect Biriaco, gave the shuttle its current configuration with the lengthening of the flybridge. The hull remains original to this day.
In the early 2000s, a new Italian owner kept the shuttle until 2008, when it was purchased by the current owner. The shuttle was in a covered storage in Genova Voltri, completely dismantled only with the new engines and generators (0 hours) mounted but not installed and with the supporting structures.
Since 2008, engines and generators have been installed by Cummins of S. Margherita Ligure. The interiors designed by the naval architect Alessio Liuni of Rome were made and assembled by a German carpentry.
In 2010 the shuttle was transferred to the Marina di Genova for the final installations and tests carried out by the Italian RINA. It was later recorded in Vienna.
All the on-board electronics were installed in 2009 and subsequently overhauled by Massimo Orlandini's Etruria Service of San Vincenzo (FI) in 2014.

Structured on three decks, Gaia is organized with a dining area at the stern of which, from a circular staircase, you can access the lower deck, which houses two cabins and two bathrooms. From the aft saloon, continuing towards the bow, on the left is the galley and then the bridge in an elevated position. There is also the main saloon, with a second circular staircase leading to the lower deck, reserved for the owner's cabin (full beam) and VIP. The flybridge has a bimini and a large sunbathing area, as well as a second helm station and a 5-meter tender. On deck, towards the bow, there is also a sailing dinghy of over 4 meters. Also towards the bow a companionway leads to the crew area (with two cabins).
The interiors have been furnished with maple wood and champagne-colored pearly lacquers (walls and furniture), while for the floors the main deck is characterized by a wenge wood in strong contrast with that of the walls and the lower deck by biscuit-colored carpeting. The ceilings are in Alcantara.

From 2008 to 2010
The Yacht has undergone a complete restoration in Italy, where new interiors have been created (the current ones) curated by the architect Alessio Liuni and equipped with all modern comforts as well as the installation of new engines and generators.

Jobs 2023
All the deck white has been repainted: Deckhouse sides and bulwark with two-component polyurethane spray and anti-rust treatment with subsequent polishing.
Total renovation of the seat benches of the external aft dinette
Renovation of wood such as deckhouse glass frames, external hinged and sliding doors, handrails, deck and flyer handrails. Sanded, impregnated in colour with a pad, finished with a two-component polyurethane clear coat by spray
Complete overhaul of engine room done as follows:
Get all the dunnage up. Where rust was present, scraped with wire brushes, treated with Acetone, applied 2 coats of rust converter, cleaned with antisilicone, applied 2 coats of grey polyurethane primer (RAL 7040), finished with two-component polyurethane paint 2 coats grey (RAL 7040).
Painting of cleaned and degreased diesels with a mixture of petrol and diesel, sanded, pickled with acetone and spray-painted with matt white high-temperature acrylic (RAL 9010).
Cleaning and painting of the crates of the generators, with matt white spry acrylic (RAL 9010), all made in the spray booth.
Replacement of the electronic board of the Condaria air conditioning system with a new one.

Jobs 2024 April
Deck sanding - hull control, antifouling and zinc

Electronic tools for navigation:
Chain counter, Display.

Staging and technical:
Engine Alarm, Water pressure pump, Entry door, Teak Cockpit, Water harbor connector system, Stabilizers (Wesmar RS series).

Domestic Facilities onboard:
Inverter Air Conditioning, Interior wooden floor, Video camera (di controllo).

Security equipment:
Barometer, Safety equipment beyond 50 miles, 2 Lifebuoy With Safety Rope and Light Buoy.

Entertainment:
Speakers, Radio AM/FM.

Kitchen and appliances:
Washer dryer (Hover 5kg), Electric hot plate.

Upholstery:
Cushions, Fly Bridge Cuscions, Cockpit Cushions, Window Cover.

Accessories notes:
Alfa Lavel diesel water separator centrifuge
Sailing dinghy 4.05 mt
Pressure washer
Full bed linen and towels for all cabins
Portable radios for manoeuvring communications
Compressor
3 vacuum cleaners + 1 cordless vacuum cleaner

Equipamento

cabine de marinheiro, antena TV satélite, TV, bimini, bote (Loker Boat 4,30m+fuoribordo Yamaha 25hp 2T), capuchana, chuveiro no convés, escada de banho (2x - laterale con candelieri - removibile), grua (2x - Bioinox), passerelle (idraulica a poppa Bioinox), sun shade, âncora (2x - Hull 200Kg + 100mt catena da 14 - Hull 200 Kg + 100mt catena da 12), ar condicionado (Condaria PWCM), bateria (20x - servizi 24V 1500ah), carregador das baterias (Viktron), gerador (2 x Kw 13,5 - Onam MDKBD), hélice de proa (500ah), inversor (Viktron), luz pirata, molinete da âncora elétrico (Lofran's Titan idraulico con telecomando), sistema água quente (Indesit lt 75), tomadas 220 V, balsa salva-vidas (12 px valigia rigida), bóia salva-vidas, bomba das cavernas manual, buzina, coletes, extintores, sistema de apagar fogos, anemómetro (2x - Garmin GMI 10), GPS, GPS plotter (Garmini GPSMAP 5015 - GPSMAP 4000), indicador do ângulo do leme, piloto automático (2x - Raymarine Smartpilot ST3002), plotter, radar (2x - Garmin), sonda, velocidade, VHF (2x - Icom IC M603- Icom IC-M33 portatile), congelador, forno, frigorifico, máquina de gelo, máquina de lavar loiça (Miele), micro-ondas, secador, WC elétrico (5x), antifouling, colchões, desanalizador (150 l/h HP WaterMakers con comando remoto), tanque de águas negras

Fornecedor:

Mulazzani Trading Company

Senhor Lella Fattori

Via Lungodarsena, 50

47843 Portoverde di Misano Adriatico (RN)

Itália

Telefone de casa:

+39 0541 613 500

Idiomas:

inglês, italiano