genoa de enrolar, molinetes elétricos, vela grande de enrolar, altifalantes no poço, CD, radio, bimini, capuchana, chuveiro no convés, defesas, escada de banho, passerelle, plataforma de banho, carregador das baterias, hélice de proa, ligação 220 V, sistema água quente, bomba das cavernas elétrica, bomba das cavernas manual, coletes, anemómetro, bússola, GPS, piloto automático, plotter, radar, sonda, velocidade, VHF, forno, frigorifico, mesa no poço

Informação suplementar
Manufacturer Provided Description
Evolution of the famous Dufour 410, the Dufour 412 Grand Large places herself among the flagships of the Grand Large range. For this 2016 millesime, Dufour Yachts engineers and Felci Yachts Design have as project guideline to integrate all functionalities thus far reserved to bigger sized yachts.
Ambitious challenge skillfully executed, this starts with the optimization of the exterior spaces. The new closed cockpit by its aft seats conceals a fully equipped exterior galley with barbecue, sink and refrigerator. This new layout, at once functional and securing, allows to take advantage of the entire cockpit, and makes the boat more spacious.
The Dufour 412 also benefits from new equipments for always more pleasant navigations, in particular the fixed bowsprit to simplify the mounting of downwind sails.
With her new look and her new equipments, the Dufour 412 rejoices of all the attributes of an exceptional yacht, and naturally places herself among the upscale level in her category.

Construction
Hull: Hand-laminated in polyester/glassfibre.
Decoration: Decorative stripes on the hull.
Gelcoat: NPG gelcoat with first mat impregnated with NPG resin forming an optimum barrier against osmosis.
Structure: Hull bottom counter-moulded, floors laminated into the hull.
Deck: Sandwich with injected foam core
Ballast: Keel bolts bear on stainless back-plates
Rudder: Semi-elliptical shape, filled with closed-cell epoxy foam.
Rudder stock: Solid stainless steel.
Non-slip deck surface: Non-slip structured deck surface

Deck
Shroud chainplates: Single chainplate for cap shrouds and lower shrouds.
Safety chainplates: Safety harness chainplates in cockpit floor
Chainplates: 2 backstay chainplates
Midships mooring cleats: 2, aluminium
Mooring cleats: 4, aluminium.
Rubbing strips: 6 stainless, on hull sheerline
Fuel deck fillers: 1
Water deck fillers: 2
Mainsheet tracks: On coachroof with adjusting car.
Genoa tracks: With car.
Downhaul: With 6-fold purchase tackle.
Pulleys: 2 single genoa sheet return pulleys on coaming
Through-deck fitting: Stainless swan-neck for electrical and electronic cables.
Deck organizers: 2 deck organizers, 4- and 3-sheave for halyard, sheet, and reef line returns.
Halyard winches: 1 halyard winch on coachroof.
Sheet winches: 2 genoa sheet winches on cockpit coamings
Jamcleats: 2 rows of jamcleats port / starboard level with the companionway
Furler line jamcleats: 1 at aft end of sidedeck

Cockpit
Cockpit bench seats: Slatted teak
Lockers: 2 large side lockers, lids fitted with gas struts and fixings for padlocks.
Helm: Wheel
Helm console: Polyester.
Engine control: At starboard helm position
Compasses: 2 on columns
Gas locker: In starboard aft locker
Stern door: Swings up, with built-in telescopic stainless bathing ladder
BIB locker: Life raft stowage in dedicated locker.
Shower: In port stern locker
Supply: Connector in port stern locker
Bathing ladder: Telescopic stainless bathing ladder
Cockpit floor: Non-slip polyester cockpit floor.
Emergency tiller: Head of rudder stock beneath helmsman’s floor for fitting the emergency tiller

Galley
Configurations: Longitudinal.
Worktop: ‘Corian®’ synthetic resin with wooden fiddle.
Sink: Stainless, twin bowls with Corian®C synthetic resin cover
Water: Hot and cold pumped water with chrome-plated brass single-lever mixer tap.
Gas cooker: 2-burner cooker with oven on gimbals, with removable wooden cover and stainless rail
Crockery storage: Dowels to retain crockery when heeling.
Refrigerator access: Via the frontage and the worktop.
Storage:
- 3 cubby-hole with closed compartments with formed wood flap
- 3-door under-sink unit with cutlery drawer, 2 plastic bins, waste bin
- Storage for bottles with locking
Waste bin: Sort compartments
Storage under gas cooker

Rigging and Sails
Mast: Anodized aluminium with 2 levels of swept spreaders
Rigging: 9/10 fractional
Mast stepping: On deck
Lights: Anchor and masthead lights.
Topping lift: Boom topping lift cleats.
Boom: Anodized aluminium fitted with 2 continuous reefers.
Furler: Genoa roller furler.
Standing rigging: Continuous in stainless single-strand cable, chrome-plated bronze rigging screws, comprising: forestay, twin backstay, inter. and lower shrouds.
Backstay: double
Running rigging: Running rigging in pre-stretched textile including: main and genoa halyards, boom topping lift, main and genoa sheets, 2 continuous reef lines, leech tensioner, 2 mainsheet car adjustments,furling line, downhaul tackle.
Mainsail: 2 wide reef strips, with battens and bag.
Dacron Genoa: Furling genoa with UV-protection.

Disclaimer
The Company offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel. A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.