Bénéteau S.A- Océanis 473 Clipper GTE- Year Built (velero) - en venta

Comprar Bénéteau S.A- Océanis 473 Clipper GTE- Year Built - equipamiento yate de vela - velero en venta

Navegación
compás, piloto automático, radio VHF

Equipamiento técnico
cabestrante de proa eléct., cargador de batería, impulsor de proa

Seguridad
balsa de salvamento

Equipamiento de cubierta
capucha contra salpicaduras, cubierta de teca, pasarela

Equipamiento interior
congelador, horno, refrigerador eléct.

Entretenimiento
antena de TV / DVB-T, TV

Velas
gennaker, spinnaker

Otro equipamiento
pintura subacuática

Otras informaciones
BENETEAU S.A
- OCEANIS 473 CLIPPER GTE
- Year built 2003
- 3 cabin version
- 3 shower rooms / 3 WCs
- large draft 2.10 m
- overall length: 14.30 m
- hull length: 14.15 m
- width: 4.31 m
- air draft: 18.10 m
- approximately weight: 14000 KG
- CE design category: A - 10 passengers
- B - 12 passengers / C - 12 passengers / D - 14 passengers

This sailboat is ready to sail.
Sailing never rented.
Currently based in northern Brittany, she sailed in August 2023 to Gibraltar in excellent conditions.
Its current owner (3rd owner) is an experienced skipper and sailor who has owned several beautiful units.

He will be able to pass on some of his experience to you so that you can take possession of this beautiful sailboat in the best conditions.
Handling and advice guaranteed!

The boat is up to date in terms of safety (deep sea navigation)
It has NEW sails and many recent equipment.

A "blue hull" hull painting will be required, an arrangement is possible with the owner on this subject.

Additional information, inventory and photos, on request, only with all of your contact details via the contact form.

LISTS OF MAIN WORK CARRIED OUT:
The Sails are NEW!
1 horizontal section genoa of 67 m2 in thick Dacron + extra wide UV strip (2023)
1 fully battened “full batten” mainsail of 43 m2 in thick dacron (2023)
1 complete lazzy bag (2023)
Ball carriages to facilitate raising and lowering the mainsail (2023)
1 Spinnaker/Gennaker CODE 0 on furler with a surface area of ​​180 m2 (2020)
+ 1 bowsprit (2020)
1 NV brand roof hood with stainless steel handrail (2023)
1 HARKEN 40 electric winch (installed in 2022) with its interior cabin cover
Sheathing of the 2 wheel bars (2023)
Lubrication of all winches (2023)
The majority of halyards (replaced in 2023)
RAYMARINE STX30 autopilot (new 2024)
ST 70 pilot exterior display (new 2024)
VETUS bow thruster motor (replaced in 2021)
Electric windlass dismantled and checked + new remote control + installation of an electric control in the cockpit (2023)
Anchor 25KG galvanized + lead (2024)
90 meters of 10mm chain (made in 2022)
6-person life raft (purchase 2022)
Rear stainless steel gantry (installed in 2023)
2 solar panels 2 X 130 W (2023)
1 charge regulator for solar (2023)
4 service batteries of 160 AH (2021)
New VICTRON battery charger (2022)
NAVICOM fixed touchscreen VHF with AIS receiver (2023)
Tablet support installed at the steering wheel + under the roof hood + 12 V socket (2023)
Rudder angle indicator (2023)
RAYMARINEST 6001 auto pilot repeater (replaced 2023)
Saloon cushion foams (replaced in 2022)
Front cabin mattress (replaced in 2022)
Hot water tank (2019)
WEBASTO heating (dismantled, cleaned 2022)
1 forward cabin deck porthole (currently being replaced in 2024)
Saffron rings (replaced in 2023)
lip gland (replaced in 2023)
re-aligned shaft line (2023)
hydrolube ring replaced (2023)
complete engine maintenance (2023)
timing belt (2022)
exhaust elbow (2021)
turbo (replaced in 2021)
alternator (recent)
complete treatment of the livework (full sanding of the hull + epoxy primer + antifouling (2023)
+ various things etc.

BOAT UP TO DATE AND READY FOR NAVIGATION
The boat will be sold with an engine overhaul (drain, filters, anodes)
As well as handling if desired by the new owner